20% OFF Sale Until Wednesday!
MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS
Sale Ends Wednesday, November 11, 2026!
ADVANCED kabuki masks for the MV-22 Osprey in 1:48 scale from New Ware are pre-cut masks in a wider extent than the basic grade of the set.
Responsibility details are not available.
A set of pre-cut masking pieces in kabuki paper for a model of the MV-22 Osprey tiltrotor in 1:48 scale. It is neither a kit nor a part of a model. The manufacturer has graded its masking sets, and the designation ADVANCED stands above the basic grade in that range, so this is a wider extent of masks than in the BASIC variant. If you are building a model with the emphasis on detail, it usually pays to reach for the higher grade. Kabuki paper is thin and slightly stretchy, so it follows even markedly curved surfaces and leaves no adhesive behind when removed.
The MV-22 Osprey is a tiltrotor with tilting nacelles on the wingtips. It takes off and lands vertically like a helicopter, and once the nacelles are tilted forward it flies like a turboprop aircraft, thereby combining independence from a runway with the range and speed of an aircraft. Because of operation from decks it has folding rotor blades and a rotating wing. From a modeling point of view the most demanding parts are the large areas of cabin glazing with their uneven framing and the row of small windows and covers on the fuselage, where masking by hand takes more time than the spraying itself.
Degrease the glazing and let it dry, as otherwise the masks will not hold. Take the pieces off the sheet with tweezers, lay them down from the center first and only then press the edges to the edge of the frame; on strongly curved surfaces it helps to warm a piece. Spray perpendicularly and in thin coats. On the cabin it works well to apply the interior shade first, then the base color of the fuselage and finally the camouflage itself. Before you take the masks off, check the edge against the light, as any blow-under is easier to repair before the final coat of varnish. Take the masks off while the paint has only set.
The set contains masking pieces only. The model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
