SX-Art masking stencils for the T-34/76 tank in 1:48 scale. Self-adhesive masks with which a motif is sprayed in paint instead of a decal being stuck on.
Responsibility details are not available.
The set contains self-adhesive masking stencils for a model of the T-34 medium tank with a 76 mm gun in 1:48 scale. It is not a kit. The stencils are glued to a painted and fully cured surface, oversprayed with a second color, and once they are taken off the motif remains, formed directly by the finish and not by the film of a decal.
In the smaller 1:48 scale every superfluous millimeter of film shows. The edge of a decal gleams on a matte finish, it seats poorly over welded seams and rivets and silvering is a risk. A sprayed motif behaves like the rest of the finish, so after varnishing and weathering it blends with its surroundings and looks believable even seen from close up or in a photograph.
The base must be smooth and perfectly cured, otherwise a mask will tear the paint away when removed. Reduce the tack of a stencil by laying it briefly on clean cloth, which goes double for the small masks in this scale. Spray the paint thinned, in several very thin coats and at a low pressure. Remove the masks shortly after the paint has set, with tweezers at a sharp angle. Reckon with single use.
The package contains the masking stencils alone. A model, paints and thinners are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
