1:48 Russian Medium tank T-55 - Tamiya

The masking set for the road wheels of the T-55 tank in 1:48 scale is intended for postwar wheels with a star-shaped division of the disc. The set is cut for the Tamiya kits.

Scale1:48
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 T-55 road wheel masks (for the Tamiya kits)

The set serves for masking while painting; it is not a kit or replacement wheels. The masks cover the areas of the road wheels that are to stay in a different shade after spraying. The shape follows particular parts, so the set is listed for the Tamiya kits.

What makes the running gear of this subject special

The postwar tank follows on from the older Soviet solution, but the running gear is legibly different. Here too there are five large wheels on each side, a conspicuous gap between the first and the second and no return rollers, except that the wheel itself has a markedly divided disc with star-shaped ribbing and lightening holes. Those pressings change the whole job: the edge of the tire band runs around the circumference, but the surface beneath it is not smooth, so a mask has to seat on a shaped surface and the paint has more places to try to run through. At the same time the division of the disc is what tells a postwar tank from the wartime types at first glance, so it pays not to flood it with paint and to pick it out with a light dust effect once it is unmasked. The drive sprocket is at the rear, the idler wheel at the front.

Work plan before painting

Before masking, compare the masks with the wheels from the sprue, so you know what part of the disc they will seat on. Wash the wheels in lukewarm water with dish soap and degrease them; with divided surfaces that goes double, because grease and sanding dust collect in the pressings. Apply a thin primer, which evens the absorbency out and gives a mask a better base on a shaped surface. Paint in thin coats and do not hurry; on a divided disc three light sprays are better than one generous one. Then assemble the chassis so that the wheels are painted and unmasked before the tracks go on them.

Who the set is for

  • Builders of postwar armored equipment in 1:48 scale
  • Modelers who want to keep the division of the disc legible
  • Those struggling with paint bleeding on a shaped surface
  • Builders who paint with an airbrush

The package contains masks only. The kit, paints and glue are not part of it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The disc has pronounced star-shaped ribbing and lightening holes. The surface under the tire band is therefore not smooth and a mask has to seat on a shaped surface.

Degrease, prime, press the edge of the mask down all the way around and spray several light coats instead of one generous one.

Do not count on it. The masks follow particular parts and are listed for the Tamiya kits. Check before ordering that you are building the matching kit.

Yes, a light dust effect in the pressings picks out the division and the wheel then does not look like a flat disc.

Last seen

QuickwheelQW-480221:48

1:48 Russian Medium tank T-55 - Tamiya

The masking set for the road wheels of the T-55 tank in 1:48 scale is intended for postwar wheels with a star-shaped division of the disc. The set is cut for the Tamiya kits.
In stock
6.76 €
BrengunBRL1441581:144

1:144 A4 Skyhawk ladder (Platz-Eduard kit)

A photo-etched ladder for the A-4 Skyhawk in 1:144 scale from the Czech maker Brengun is a fine metal accessory that gives a model in a small scale convincing details. It is not an airplane model in its own right.
In stock
5.96 €
EduardED84851:48

1:48 Sopwith F.1 Camel (Bentley)

1:48 Sopwith F.1 Camel (Bentley) is an injection-molded plastic kit of the British First World War fighter in the version with the Bentley rotary engine, from the Czech manufacturer Eduard.
In stock
19.80 €
EduardED6350591:48

1:48 German WWII Jerry Cans (3D-Printed)

The 3D-printed set 1:48 German WWII Jerry Cans from Eduard - German jerry cans of the Second World War.
In stock
6.80 €
IBG modelsWAW0041:72

1:72 Pz.Kpfw. IV Ausf. A

IBG Pz.Kpfw. IV Ausf. A 1:72 is a plastic kit of the early version of the German Panzer IV medium tank.
In stock
9.56 €
TamiyaTA352501:35

1:35 M4A3 Sherman 75mm Gun

The M4A3 Sherman with the 75 mm gun is an injection-molded plastic kit of the American medium tank of the Second World War in 1:35 scale from the manufacturer Tamiya. The model is supplied unassembled and unpainted.
In stock
29.56 €
AberABR352441:35

1:35 German 3,7 cm Flak 36/37

A photo-etched set for the 3.7 cm Flak 36/37, 1:35, Aber is a metal detail accessory, not a model. A set of fine photo-etched parts refines a build of the German anti-aircraft gun.
In stock
17.16 €
PeewitPWM1440081:144

1:144 Arado Ar-96 / Avia C-2 - pro modely Mark I

Pre-cut self-adhesive Peewit painting masks for a model of the Arado Ar-96 / Avia C-2 trainer in 1:144 scale. They cover the frames of the canopy glazing when spraying. This is not a kit.
In stock
3.16 €
1:48 Do 215B-5 Nightfighter landing flaps-25 %Stock ClearanceFavorite
EduardED488671:48

1:48 Do 215B-5 Nightfighter landing flaps

A photo-etched detail set Do 215B-5 Nightfighter – landing flaps in 1:48 scale from the Czech manufacturer Eduard . It is not a model of an airplane but a set of photo-etched parts for a faithful rendition of the landing flaps of the Dornier Do 215B-5 night fighter.
Last one!
13.40 €10.04 € You save 3.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.