1:48 SR-71 Blackbird. Landing gears (Testors/Italeri)

1:48 SR-71 Blackbird. Landing gears (Testors/Italeri)

55.96 €
Add to Cart

1:48 SR-71 Blackbird. Landing gears (Testors/Italeri)

A landing gear detail set for the SR-71 Blackbird model in 1:48 scale from Metallic Details. Resin parts and photo-etch for the nose and main gear; an accessory for a kit, not a model. Intended kits: Testors and Italeri.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111713207

Responsibility details are not available.

55.96 €
46.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

SR-71 Blackbird, landing gear in 1:48 scale

This set from Metallic Details sharpens up the landing gear of the large SR-71 model in 1:48 scale. It holds resin parts for the nose and main gear, that is the legs, the wheels, the wheel well liners and the gear doors, complemented by photo-etched sheet. It is an aftermarket accessory for a plastic kit; the aircraft model is not included in the package. The photo-etched fret is prepared for the Testors and Italeri kits.

The real subject

The SR-71 Blackbird is an American two-seat reconnaissance aircraft built for high supersonic flight at great altitude. Its titanium alloy structure, the leading edges running forward into the point of the nose and the two large engine nacelles with their movable cones gave it an unmistakable outline. On a machine this heavy and this fast the landing gear is sturdy: the main legs carry three wheels each and retract into roomy wells in the wing center section. On a model this is one of the most visible areas, because the aircraft stands high and the wells are easy to see once the doors are open.

Building and painting tips

Wash the resin castings in warm soapy water, cut the casting blocks off with a saw or a cutting disc and level the surfaces by wet sanding with respiratory protection. It is glued with cyanoacrylate glue; on the load-bearing gear parts it is worth reinforcing the joint with a wire pin. Separate the photo-etched parts with a sharp knife on a hard surface. Paint the wells and the legs before the fuselage is closed, then bring the detail out with a dark wash and a dry brush. Fit the wheels right at the end so that they do not get dirty while you work.

Who the set is for

  • modelers building the Blackbird in 1:48 scale
  • builders who want accurate wheel wells and gear doors
  • more experienced modelers used to resin and photo-etch
  • anyone after contest standard detail

The accessory is supplied unassembled and unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an aftermarket set that replaces the landing gear in a plastic kit you have already bought.

The nose and the main gear, that is the legs, the wheels, the wheel well liners and the gear doors.

Yes, as long as you reinforce the joints with a wire pin and glue them with good cyanoacrylate glue.

The set is designed for the Testors and Italeri kits, so check the compatibility before buying.

Last seen

Mettalic DetailsMDR48241:48

1:48 SR-71 Blackbird. Landing gears (Testors/Italeri)

A landing gear detail set for the SR-71 Blackbird model in 1:48 scale from Metallic Details. Resin parts and photo-etch for the nose and main gear; an accessory for a kit, not a model. Intended kits: Testors and Italeri.
In stock
55.96 €
MAiMMAIM350161:35

1:35 Jasmin - Afghan Woman with Burka

A resin figure of an Afghan woman in a burqa in 1:35 scale from MAiM: a civilian character from the setting of the Middle East and Central Asia.
In stock
10.76 €
1:48 MiG-25 RB Pre-cut painting masks for ICM kit-25 %Stock ClearanceFavorite
ReskitRSM48-00161:48

1:48 MiG-25 RB Pre-cut painting masks for ICM kit

The pre-cut Reskit 1:48 masking set for the MiG-25 RB is an accessory for the ICM plastic kit in the reconnaissance-bomber version.
2 left
6.36 €4.76 € You save 1.60 €
MikromirMIM16-0011:16

1:16 Ukrainian UAV Shark - Armed Forces of Ukraine

The Ukrainian Shark reconnaissance drone 1:16 is a plastic kit from the maker Mikromir depicting the Ukrainian Shark unmanned reconnaissance aircraft in 1:16 scale.
In stock
19.96 €
Voyager ModelPEA1421:35

1:35 WWII German Sd.Kfz.250 NEU Amour Plate (For DRAGON Kit)

Photo-etched armor plates for the Sd.Kfz. 250 in the late configuration, 1:35 scale, are an extensive Voyager Model add-on set for a kit of the half-track carrier you already own: it is not a model but brass parts for the hull. Cut for the Dragon kit.
In stock
37.56 €
1:32 F-35A Lightning II seatbelts STEEL-25 %Stock ClearanceFavorite
EduardED333541:32

1:32 F-35A Lightning II seatbelts STEEL

Eduard 1:32 F-35A Lightning II seatbelts STEEL are photo-etched steel seat belts for the cockpit of an F-35A model in 1:32 scale. They are supplied pre-painted and are fitted into a separately purchased kit.
2 left
8 €6 € You save 2 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.