29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 U.S. M4A3 Sherman - Hobby Boss

The masking set for the road wheels of the American M4A3 Sherman tank in 1:48 scale is cut for the kit from Hobby Boss.

Scale1:48
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

6.60 €
5.45 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

M4A3 Sherman road wheel masks in 1:48 scale

Pre-cut masks for painting the wheels of the American M4A3 medium tank in 1:48 scale. They cover the rubber tire band, so you spray the rim in the vehicle color and the rubber stays dark. The set is cut for the M4A3 Sherman kit from Hobby Boss.

What makes the running gear of the Sherman special

The Sherman does not have its wheels sprung individually but grouped in bogies in pairs; a return roller also sits above each bogie. Several pairs of wheels plus the rollers therefore come to a side, that is, a great many identical rings which have to look uniform. The second peculiarity is the type of disc. Shermans used both solid pressed discs and discs with spokes and through holes. On a spoked wheel, paint sprayed at an angle gets through the openings onto the rubber tire band from behind, so a mask on the front face is not enough by itself. Before masking, therefore, look at which type of disc your kit contains.

When paint bleeds through the holes in the disc

On spoked wheels guide the airbrush square to the face of the wheel and avoid spraying at a slant from the side, where the stream passes through a hole and lands on the tire band from the other side. It also helps to stand the wheel on a flat surface while painting, so nothing is left open from behind. Deal with the classic bleeding under the edge of a mask through the order of coats: a thin coat of the rubber shade over the whole part first, then the mask and only then the rim color — any penetration is lost in a color that belongs there anyway. And expect that perfection is not needed on a running gear; dust and mud will unify small imperfections in the end.

Who the set is for

  • Builders of American Second World War equipment in 1:48 scale
  • Modelers who want every tire band ring to be the same
  • Those struggling with bleeding on wheels with holes in the disc
  • Anyone after a faster finish to a running gear

Paints, glue and the kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

On wheels with a spoked disc the stream of paint passes through the openings and lands on the tire band from behind. Spray square to the face of the wheel, not at a slant from the side, and stand the wheel on a surface while painting.

It is cut for the kit from Hobby Boss. The wheels of other kits have different dimensions and a different type of disc, so check the match beforehand.

It does not. On a finished model the running gear gets dusted and muddied, so small imperfections are lost. What matters more is that every wheel looks the same.

Spray a thin coat of the rubber shade over the whole part first, then stick the mask on and only afterwards paint the rim. Any penetration then merges with the tire band color.

Last seen

QuickwheelQW-480021:48

1:48 U.S. M4A3 Sherman - Hobby Boss

The masking set for the road wheels of the American M4A3 Sherman tank in 1:48 scale is cut for the kit from Hobby Boss.
In stock
6.60 €
AV-8A US MARINES - Gr.1/3 HARRIER UK RAF SET-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-7246

AV-8A US MARINES - Gr.1/3 HARRIER UK RAF SET

Six acrylic shades for vertical take-off Harriers: a British pair of upper surface tones to the British Standard, two gray tones of the Federal Standard and a pair of whites.
7 leftof 8
14.76 €11.08 € You save 3.68 €
New WareNWAM06441:72

1:72 Petlyakov Pe-2 Soviet Dive Bomber kabuki mask

New Ware 1:72 Petlyakov Pe-2 kabuki mask is a set of precisely cut masking templates of kabuki tape for models of the Soviet dive bomber Pe-2 in 1:72 scale.
In stock
6.36 €
Aires/QuickboostQB491681:48

1:48 SEPECAT Jaguar GR.1/GR.1a - Upper Pylons with Adapters Airfix

1:48 upper pylons with adapters for the SEPECAT Jaguar GR.1/GR.1a from Quickboost is a resin set of pylons for refining a Jaguar model.
In stock
6.36 €
KelikRSK72-01561:72

1:72 TBM-3E - interior 3D decals for Hobby 2000/Hasegawa kit

Kelik 1:72 – the interior of the carrier-borne TBM-3E torpedo aircraft in colored relief adds detail to the cockpit and the crew space. The aircraft itself is built from a plastic kit.
In stock
11.56 €
Quinta StudioQD484771:48

1:48 A6M3 Zero 3D-Printed & coloured Interior on decal paper (Eduard)

Quinta Studio 1:48 A6M3 Zero are 3D-printed color interior decals for the cockpit of models of the Japanese A6M3 Zero fighter in 1:48 scale. Target kit: Eduard.
In stock
12.76 €
1:35 RSO Pak 40/4 75mm wheel masks-25 %Stock ClearanceFavorite
EduardXT1691:35

1:35 RSO Pak 40/4 75mm wheel masks

Self-adhesive RSO Pak 40/4 75mm 1:35 painting masks from the Czech maker Eduard. They serve for accurate painting of the wheels of the running gear; it is not a model, which is obtained separately.
2 left
8 €6 € You save 2 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.