20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:48 Yak-1B (late production) dashboard Interior 3D Decal

1:48 Yak-1B (late production) dashboard Interior 3D Decal

6.28 €
Add to Cart

1:48 Yak-1B (late production) dashboard Interior 3D Decal

Quinta Studio 1:48 Yak-1B late production, 3D instrument panel decal is a targeted accessory that replaces the molded instrument panel of a plastic kit with a colored relief decal.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591111000000

Responsibility details are not available.

8.36 € 6.28 €
5.19 € without VAT
−25 % You save 2.08 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Yak-1B late production 1:48 — 3D instrument panel decal (Quinta Studio)

This product is neither a model nor a complete interior. It is a separate 3D decal of the instrument panel of the Soviet Yak-1B fighter in its late production form, in 1:48 scale. The part is printed in relief and already in color, on a backing decal paper from which it is slid onto the kit part in water. Compared with an etched panel it does away with painting and with fitting a backing film with the dials.

Where it shows most

The instrument panel is the most closely watched place in a cockpit, because it is visible even through a closed canopy. Molded plastic in this scale usually offers only the outlines of the dials, and hand-painting fine scales is work for long evenings. A colored 3D decal solves that in one step and brings out even details that could hardly be done with a brush. The set is focused on the panel; the rest of the cockpit is covered by the full interior variant of the same range.

Application tips

Level the original instrument relief on the plastic part flat with a file, degrease the surface and polish it with a gloss varnish — the panel has no adhesive layer of its own and it is exactly the gloss that holds it. Compare the outline dry and trim any overhang with a scalpel while it is still on the sheet, not after it has been applied. Then soak the panel for about fifteen seconds in lukewarm water and slide it off the backing paper onto the part. Press it down with a soft stick from the center outwards, draw the water off and leave it weighted for a while. Do not use a decal softener or a decal fixer, as the chemicals attack the printed resin. Do not spray the dials over with a matte varnish, or you would lose the built-in gloss of the glass. Light weathering with a dry brush is possible, but go carefully, as the printing can be worn through.

Who it is for

  • modelers building with a closed canopy, where the panel is what is mainly seen
  • builders of Soviet fighters in 1:48 scale
  • anyone after a quick improvement without a full interior set
  • those who do not want to hand-paint dials or paint photo-etch

This is an accessory for a kit, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set is focused on the instrument panel. The complete cockpit is covered by the full interior variant of the range.

A matte varnish would suppress the gloss of the imitated glass. If you do varnish, do it only very lightly and with a varnish gentle to the printing; do not use a decal softener or a decal fixer, as they would attack the printed resin.

Photo-etch is flat and has to be painted. This part has relief, comes finished in color and is simply slid off the backing paper in water.

Last seen

1:48 Yak-1B (late production) dashboard Interior 3D Decal-25 %Stock ClearanceFavorite
Quinta StudioQD48004-D1:48

1:48 Yak-1B (late production) dashboard Interior 3D Decal

Quinta Studio 1:48 Yak-1B late production, 3D instrument panel decal is a targeted accessory that replaces the molded instrument panel of a plastic kit with a colored relief decal.
7 leftof 13
8.36 €6.28 € You save 2.08 €
Dead DesignUC480571:48

1:48 F-89D/J Scorpion UC bays MON/REV

A masking set for the landing gear bays of the F-89D/J Scorpion in 1:48 scale. The designation in the name points it to the Monogram or Revell kit.
In stock
5.96 €
1:48 F-15E Turkey Features exhaust nozzles
-20 %
Favorite
AiresAIR41151:48

1:48 F-15E Turkey Features exhaust nozzles

Replacement engine exhaust nozzles for an F-15E model in 1:48 scale, in the version with the outer covers for which the term turkey feathers has become established.
In stock
20.80 €16.64 € You save 4.16 €
1:48 R-27T - AA-10 Alamo B (2 pcs)-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-110421:48

1:48 R-27T - AA-10 Alamo B (2 pcs)

A pair of air-to-air missiles R-27T (AA-10 Alamo B) in 1:48 scale by AMMO of Mig Jimenez for completing external stores.
4 leftof 5
15.16 €11.36 € You save 3.80 €
1:48 de Havilland Vampire F.3 TFace-25 %Stock ClearanceFavorite
EduardEX8351:48

1:48 de Havilland Vampire F.3 TFace

de Havilland Vampire F.3 TFace 1:48 - an Eduard masking set contains pre-cut kabuki masks for the outer and the inner side of the canopy glazing. It is not a kit.
9 left
9 €6.76 € You save 2.24 €
1:35/1:48/1:72 Cut - Outs (English Version)
-20 %
Favorite
AK interactiveAK1300351:35

1:35/1:48/1:72 Cut - Outs (English Version)

Cut-Outs from AK Interactive is a publication with paper accessories to cut out for dioramas and models in 1:35, 1:48 and 1:72 scales; it is not a model and not a kit.
In stock
39.96 €31.97 € You save 7.99 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.