1:72 ?-26 Part II

A decal sheet for a model of the Soviet T-26 light tank in 1:72 scale, the second part of the series.

Scale1:72
Manufacturer Colibri Decals
Product EAN8591111740241

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The T-26 was a Soviet light tank of the 1930s and one of the most numerous tanks of its day. It was built in a whole range of standards, from machines with a pair of turrets to the later single-turret versions with a gun, and it saw action in many conflicts before the Second World War and at its beginning.

What the set contains

A sheet of decals for models of the T-26 in 1:72 scale. The Part II designation sets this sheet apart from the first part of the same series, so the two sheets offer different subjects. The particular overview of the markings and their layout is given in the instructions that come with the sheet.

How the decals are applied

Before you soak the sheet, check in the instructions whether it is an adhesive type; an adhesive film that has been soaked is ruined, whereas a waterslide decal that has not been soaked can be soaked later. With an ordinary waterslide decal, proceed as follows: cut the motif out together with its backing as close to the artwork as possible, dip it in lukewarm water for a few seconds and let it rest until the film begins to slide on the backing. The base must be smooth and glossy, otherwise the decal will silver. Slide the motif into place, press the water out with a soft brush and blot the rest. A decal softener will help the decal to bed down into pressings and gaps. Once it has dried, overspray with matte varnish so that the gloss base disappears.

Who it is for

For modelers building Soviet armored vehicles in 1:72 scale who want to finish a model other than with the decals from the kit.

  • 1:72 scale
  • decals for the T-26 tank
  • the second part of the series
  • check the type of the sheet in the instructions before soaking

The model, paints and varnish are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

With an ordinary waterslide sheet yes, a few seconds in lukewarm water is enough. First, though, check in the instructions whether it is an adhesive type, because an adhesive film that has been soaked is ruined beyond saving.

Air was left under the film because the base was matte or rough. Apply over gloss varnish and use a decal softener, which pulls the film down to the surface.

The Part II designation means the second sheet of the series for the T-26; it holds different subjects from the first sheet. The exact list of markings is given in the instructions in the package.

This is a decal sheet. The model, paints and varnish are not included in the delivery, unless stated otherwise.

Last seen

Colibri DecalsCD720311:72

1:72 ?-26 Part II

A decal sheet for a model of the Soviet T-26 light tank in 1:72 scale, the second part of the series.
In stock
5.96 €
MontexMXKAM320821:32

1:32 Fw 190A-8

A set for the Fw 190A-8 in 1:32 scale. It contains masks for the glazing and the insignia and two metal barrels with a genuinely shaped muzzle.
In stock
17.16 €
TamiyaTA80322

XF-22 RLM Grey 10ml

Tamiya XF-22 RLM Grey (Enamel) is a matte enamel (synthetic) modeling paint , 10 ml — a gray-green shade from the German aircraft color system RLM, intended mainly for interiors and cockpits of German aircraft . It is thinned with X-20 thinner.
In stock
1.56 €
Aires/QuickboostQB486541:48

1:48 MiG-17 landing light

Quickboost - a resin landing light for the MiG-17 in 1:48 scale. A fine accessory replacing the kit part of this Soviet fighter.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.