1:72 BAC TSR.2 wheels w/ weighted tires, type

1:72 BAC TSR.2 wheels w/ weighted tires, type "b"

10.36 €
Add to Cart

1:72 BAC TSR.2 wheels w/ weighted tires, type "b"

Resin wheels with deformed tires for the BAC TSR.2 in 1:72 scale from Armory, variant type b. An accessory that replaces the plastic landing gear wheels, not a kit of the aircraft.

Scale1:72
Manufacturer Armory
Product EAN8591111694940

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Armory 1:72, wheels with deformed tires for the BAC TSR.2, type b

This item is not a model of the aircraft but an accessory set for modelers. It contains resin wheel castings that will replace the plastic landing gear parts from the base kit. The tires are shaped with the deformation caused by the load of the aircraft, so once set on its base the finished model looks as if it really stood on its wheels rather than merely touching them. The type b designation sets the set apart from the differently executed variant in the same range, which Armory offers under its own part number.

The real subject

The BAC TSR.2 was a British twin-engined strike and reconnaissance aircraft of the first half of the 1960s. It was designed for very fast flight at low altitude and its development was among the most technically ambitious British programs of its day. Only the prototype flew, and the program was ended in 1965. The landing gear of the aircraft was exceptionally sturdy, with a pair of wheels arranged on the main legs, because operation from less well-prepared surfaces was envisaged.

Building and painting tips

First wash the castings in lukewarm soapy water and let them dry: residues of mold release agent otherwise prevent the paint from adhering. Cut the casting blocks off with a fine saw or a knife and level the seating surface with sanding paper; sand wet for preference and do not breathe in the resin dust. Resin is glued with cyanoacrylate, not with plastic cement. Before spraying, check that both wheels touch the base across the whole deformed area and that the model does not stand crooked. The hub is most easily separated with a circular mask or with liquid mask applied to the tire.

Who the set is for

  • modelers building the TSR.2 in 1:72 scale who want crisper landing gear detail
  • anyone interested in the weighted tire effect without shaping the plastic themselves
  • diorama builders where the model stands on a surface and the landing gear is visible
  • modelers accustomed to working with resin and cyanoacrylate glue

The set is an accessory to a model, not a kit of the aircraft. It is supplied unpainted; paints, glue and the base model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an accessory set of resin wheels that will replace the plastic landing gear parts. You have to obtain the model of the aircraft itself separately.

The casting has a flattened footprint where it touches down, of the kind caused by the weight of the aircraft. The model then does not stand on a thin point of contact and looks more natural.

Cyanoacrylate-based super glue. Ordinary plastic cement does not attack resin and the joint will not hold.

Yes. Wash them in lukewarm soapy water, cut off the casting block and level the surface. Only then apply primer and paint.

Last seen

ArmoryARAW724151:72

1:72 BAC TSR.2 wheels w/ weighted tires, type "b"

Resin wheels with deformed tires for the BAC TSR.2 in 1:72 scale from Armory, variant type b. An accessory that replaces the plastic landing gear wheels, not a kit of the aircraft.
In stock
10.36 €
FujimiFU046871:24

1:24 Skyline 2000GT-R (KPGC10) Rubber Sole GT-R

A plastic kit of the Japanese coupe Nissan Skyline 2000GT-R with the body code KPGC10 in 1:24 scale. It is supplied as a set of parts to assemble and paint.
In stock
33.16 €
Airviper nozzle cap guard (4 slotted aircap nozzle guard reversible)-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-8668

Airviper nozzle cap guard (4 slotted aircap nozzle guard reversible)

The Airviper nozzle cap guard is a replacement part for AMMO of Mig Jimenez airbrushes — a four-slot crown cap that can be fitted either way round.
Last one!
12.76 €9.56 € You save 3.20 €
Voyager ModelPE3511601:35

1:35 Modern US M60A1 MBT upgrade set(For TAKOM 2132)

A Voyager Model photo-etched detailing set for the American M60A1 tank in 1:35 scale. An accessory to a plastic model that replaces coarse plastic parts with thin brass sheet. Intended for the Takom 2132 kit.
In stock
23.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.