Masks for the Skyraider AD-4W and AEW.1 in 1:72 scale (Peewit) are die-cut self-adhesive templates. The box states them for Sword kits.
Responsibility details are not available.
Note that this is not an aircraft model but a set of masking templates. The box states that the set is intended for Sword kits, and it covers both the American AD-4W form and the British AEW.1. The Czech brand Peewit makes die-cut self-adhesive masks for plastic models, typically for canopy frames and for wheels.
The Skyraider in the form with the letter W was not an attack aircraft but a radar carrier: under the fuselage it had a bulky radome with an antenna and inside the fuselage room for operators. It came about from the need to have a machine aboard an aircraft carrier that could see low-flying targets beyond the horizon of the escorting vessels. The Royal Navy took these aircraft over under the designation AEW.1 and used them long after the American machines had been withdrawn. The large radome under the fuselage makes an otherwise familiar type look unusual at first glance.
Lay the masks onto clean and degreased glazing and press them down with a wooden stick or tweezers so that paint does not run under the edge. Spray the frames in the interior color first and only then in the external shade. Apply the paint in several thin coats; a heavy coat tears when the mask is lifted. Lift the mask while the paint has only set. On British machines count on a dark gray upper surface and a light lower one, where the transition is soft and is sprayed from a greater distance.
The set holds masks only. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!