29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:72 F-4C/D Phantom II ADVANCED kabuki masks

The 1:72 F-4C/D Phantom II ADVANCED kabuki masks are a New Ware masking set from kabuki tape for a model of the F-4C or F-4D Phantom II aircraft in 1:72 scale in the middle grade of extent. It is not a kit, but an accessory for painting.

Scale1:72
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

5.80 €
4.79 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The 1:72 F-4C/D Phantom II ADVANCED masking set from New Ware

This is not a model of the aircraft, but a self-adhesive masking set from kabuki tape for a model of the F-4C and F-4D Phantom II in 1:72 scale. With this brand the ADVANCED grade lies between the BASIC and EXPERT levels; it corresponds to a wider extent of masking than BASIC, but does not reach the highest level.

The order of painting decides

With larger masking sets it pays to plan the procedure before you reach for the airbrush. The sequence that has proved itself is the base treatment of the surface, the color of the interior features, masking, the lighter shade of the camouflage and finally the darker one. A light color under a dark one is covered over more easily than the other way around, so there are fewer layers and the edge stays sharp. Always mask onto paint that has dried through — on a fresh layer the tape imprints the texture and pulls it away when peeled off.

Usage tips

Store the sheet flat, dry and out of direct sunlight; bent kabuki tape is hard to lift off and the adhesive hardens over time. Before you lay a mask on, check that the base is not dusty — a microscopic grain under the tape creates a channel through which the paint will run under. Direct the airbrush at a right angle to the masked edge and never at an angle under it. Spray rather more very thin coats than one generous one; an excessive layer creates a ridge at the edge that is visible once the mask is off. Remove any adhesive residue, should it exceptionally stay behind, with a dry cloth, not with solvent.

Who the set is for

  • modelers building the F-4C or F-4D in 1:72 scale
  • builders for whom the extent of the lowest grade is not enough
  • modelers working with an airbrush and multicolor camouflage
  • anyone interested in sharp edges without cutting tape by hand

The set holds only the masks. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It lies between the lowest and the highest level that the brand distinguishes, and it corresponds to a wider extent of masking than BASIC.

The base treatment of the surface, the color of the interior features, masking, the lighter shade of the camouflage and only at the end the darker one all prove their worth.

Flat, dry and out of direct sunlight. Bent tape is hard to lift off and the adhesive hardens over time.

The cut of the masks is tied to the shape of particular parts. Verify that it matches your model before purchase.

Last seen

New WareNWAM08911:72

1:72 F-4C/D Phantom II ADVANCED kabuki masks

The 1:72 F-4C/D Phantom II ADVANCED kabuki masks are a New Ware masking set from kabuki tape for a model of the F-4C or F-4D Phantom II aircraft in 1:72 scale in the middle grade of extent. It is not a kit, but an accessory for painting.
In stock
5.80 €
1:48 A-6E 3D-Printed & coloured Interior on decal paper (Kinetic)-25 %Stock ClearanceFavorite
Quinta StudioQD483241:48

1:48 A-6E 3D-Printed & coloured Interior on decal paper (Kinetic)

Quinta Studio 1:48 A-6E – 3D-printed color interior on decal paper is an accessory for the cockpit of a model of the upgraded Intruder carrier-based attack aircraft.
2 leftof 6
21.56 €16.16 € You save 5.40 €
HatakaHTK-BS103

“WW2 Italian Air Force Paint set vol. 1"

A Hataka paint set for Regia Aeronautica aircraft of the Second World War period, volume 1.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.