1:72 F-86L Sabre Dog Royal Thai Air Force

The 1:72 F-86L Sabre Dog decal sheet in Royal Thai Air Force colors is an accessory for a kit you already own, not a model. It brings markings for the interceptor version of the famous Sabre.

Scale1:72
Manufacturer Siam Scale
Product EAN8591111000000

Responsibility details are not available.

9.16 €
7.57 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The F-86L Sabre Dog in Thai colors — a 1:72 decal sheet

The set holds waterslide decals for a model of the F-86L interceptor in 1:72 scale, the most widespread aviation scale. It is not a kit and not a finished model — the sheet gives the markings to a model you buy separately. It concentrates on machines of the Royal Thai Air Force.

The real subject

The F-86L is the later form of the interceptor version of the Sabre family, derived from the F-86D. Unlike the day fighters it carries a radome in the nose, and the air intake is therefore moved below it — which is where the nickname Sabre Dog comes from. Instead of gun armament it has a retractable rocket tray, and an engine with an afterburner gave it a rapid climb to altitude. The F-86L variant brought equipment for working with a ground control system and a modified wing leading edge. Machines of this version reached several allied air forces in the 1960s, where they performed air defense duties.

How to use the sheet

As far as decals go, 1:72 scale is a pleasant compromise: the elements are large enough for safe handling and at the same time small enough that thick carrier film shows. So it pays to trim close to the artwork. Spray the surface underneath with gloss clear and let it dry overnight, as soft clear under a decal will go dull. Soak the decal for a few seconds, set it on paper and wait until the backing gives on its own. Put it on the model with a little water, align it with a brush and blot the excess with a towel. Around the radome and on the fuselage bands, use a decal softener so that the decal settles into the engraved lines. If you are building a model with a bare metal surface, fix the metallic shades with clear first — they are sensitive to touch.

Who the sheet is for

  • Modelers building jet aircraft in 1:72 scale
  • Those interested in interceptors with an onboard radar
  • Collectors of export variants of the Sabre family
  • Builders who want to set a model apart from the box markings

This is an accessory for a model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A decal sheet in 1:72 scale only. The aircraft model, the paints and the clear coat are not part of it.

The nickname belongs to the interceptor branch of the type, with the radome in the nose that gave the aircraft its characteristic shape.

Ideally overnight. On clear that has not dried, a decal goes dull and the edges give themselves away.

The extent of the sheet is not stated here. If you are building a particular machine, verify the contents beforehand.

Last seen

Siam ScaleWI0021:72

1:72 F-86L Sabre Dog Royal Thai Air Force

The 1:72 F-86L Sabre Dog decal sheet in Royal Thai Air Force colors is an accessory for a kit you already own, not a model. It brings markings for the interceptor version of the famous Sabre.
In stock
9.16 €
Aires/QuickboostQB726351:72

1:72 F-14 Tomcat ECS heat exchanger exhaust grills

Add-on heat exchanger exhaust grills for a model of the F-14 Tomcat in 1:72 scale, with the manufacturer's part number QB72635.
In stock
3.56 €
New WareNWAM03321:48

1:48 Mask F-4J/S Phantom II EXPERT (ZOUKEI-MURA)

The 1:48 F-4J and F-4S Phantom II Expert masking set is the widest of the levels offered of cut masking templates of kabuki paper for a model of the naval version of the famous two-seat fighter. The target kit: Zoukei-Mura.
In stock
7.96 €
MH modelsMHK720051:72

1:72 Bell AH-1G/Q/S Cobra vacuform canopy for Special Hobby/Revell closed version 2 pcs.

MH models 1:72 Bell AH-1 Cobra vacuform canopy is a set of two vacuum-formed clear canopies for a model of the AH-1 Cobra attack helicopter in the closed version.
In stock
5.16 €
EduardED4915331:48

1:48 Sikorsky UH-60A cargo seatbelts STEEL

Eduard 1:48 Sikorsky UH-60A cargo seatbelts STEEL is a set of etched steel pre-colored belts for the seats in the cargo cabin of the helicopter. It is a detail accessory, not a kit.
In stock
15 €
1:24 Hyundai Porter II Steel Wheel Set (For Academy)-25 %Stock ClearanceFavorite
DEF ModelDW240031:24

1:24 Hyundai Porter II Steel Wheel Set (For Academy)

1:24 Hyundai Porter II Steel Wheel Set is a supplementary set of wheels for a model of a light utility vehicle from Academy; the vehicle itself you will not find in it.
Last one!
13.96 €10.48 € You save 3.48 €
DN ModelsDN48/827-0181:48

1:48 Canopy And Wheels Paint Masks For IAF F-16I Sufa

1:48 Canopy And Wheels Paint Masks For IAF F-16I Sufa is a set of pre-cut masks for the cockpit glazing and the wheels of the Israeli two-seat version. It is made by the Bulgarian brand DN Models.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.