1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels

1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels

10.36 €
Add to Cart

1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels

Kits-World 1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels is a color decal of the instrument panel with relief, in the variant with unlit screens, 1:48 scale.

Scale1:48
Manufacturer Kits-World
Product EAN9591111000054

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sea Harrier FA.2 with Unlit Displays 3D Panel 1:48

A cockpit accessory for a model of the Sea Harrier in the FA.2 version in 1:48 scale from Kits-World. The color print with relief is transferred like a decal and takes the place of painting the instruments by hand. The FA.2 version has its cockpit equipment laid out differently from the earlier FRS.1, which is why it has a sheet of its own. Here the displays are printed as unlit.

How a decal sits on an uneven base

On the outside of a model it is normal to lay a decal over rivets and engraved lines, and there a softener is a necessity: without it a marking would never settle over the relief. In the cockpit the rule is the opposite: under the panel there should be a flat plane. It is therefore sensible to cut away and sand the molded gauges in the kit, because otherwise they press into the print from below and bulge it in one place while leaving a gap in another. If the surface cannot be leveled, more small drops of softener around the perimeter and patient waiting will help, but pressing with a brush will not.

Procedure

A gloss base, a short soak, a rest and a slide onto the damp surface. The position is fine-tuned with a brush along the edge and the surplus water is blotted away with a tissue laid on. Softener in drops only. Once dry, matte varnish on the surroundings; leave the displays gloss. Finish the seat belts and the colored control knobs last of all.

Who it is for

  • Builders of the Sea Harrier FA.2 in 1:48 scale
  • Modelers building with the canopy open
  • Static builds and dioramas with a parked machine
  • Those after a cockpit without photo-etched parts

An accessory, not a kit. The model, paints and glue are not included in the package. The manufacturer also makes sheets for other Sea Harrier versions; tell them apart by the exact version designation.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

We recommend it. Raised gauges under the decal will create bulges and gaps.

It is a separate product for the FA.2 version. The particular differences in the printing are given by the maker of the set.

Leave it alone for at least several hours, until the relief is no longer pliable, and only then varnish it.

Last seen

Kits-WorldKW3D14810551:48

1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels

Kits-World 1:48 BAe Sea Harrier FA.2 screens OFF 3D Full colour Instrument Panels is a color decal of the instrument panel with relief, in the variant with unlit screens, 1:48 scale.
In stock
10.36 €
IBG modelsIBG72U0611:72

1:72 Gotha Go-242A-1/Go-244 MG15 Machine Guns

Gotha Go-242A-1/Go-244 – MG15 machine guns 1:72 from IBG Models. A 3D printed resin set of defensive machine guns for more faithful armament.
In stock
5.56 €
ReskitRS72-04551:72

1:72 AIM-7E Sparrow III missiles (4 pcs)

1:72 AIM-7E Sparrow III Missiles (4 pcs) is a set of four 3D-printed air-to-air missiles for detailing models of American fighters.
In stock
8.36 €
Quinta StudioQR350561:35

1:35 KrAZ-214B/255B floor mat (Roden)

KrAZ-214B/255B - floor mat 1:35 (Quinta Studio) is a color 3D-printed part representing the cab floor mat for the plastic KrAZ-214B and KrAZ-255B kits from Roden. It is applied like a decal and gives the cab accurate detail without painting.
In stock
3.16 €
ZvezdaZV62831:100

1:100 Soviet BT-3A light artillery tank

Zvezda 1:100 Soviet BT-3A light artillery tank is a small injection-molded plastic kit of a fast tank of the interwar era.
In stock
6.36 €
TakomTKM2209W1:35

1:35 T-28² Box - T-28 + M28A1/A2 + Modelling Guide

The collector's edition Takom T-28² Box (1:35) with two plastic kits of American super-heavy tanks and a printed Modelling Guide.
In stock
79.96 €
Hobby BossHB829641:72

1:72 Chinese DF-61 ICBM

DF-61 ICBM is an injection-molded plastic model of the Chinese intercontinental ballistic missile on its launch vehicle in 1:72 scale by Hobby Boss. The model is supplied unassembled and unpainted.
In stock
31.56 €
FlyhawkFH7500051:700

1:700 German Navy 2cm SK C/30 Anti-Aircraft Gun

The 2 cm SK C/30 guns of the German Navy is a set of printed replacement parts for models of ships in 1:700 scale.
In stock
7.96 €
AFV ClubAFV350791:35

1:35 Tiger I Ausf.E

The Tiger I Ausf. E is a plastic kit of the German heavy tank in 1:35 scale from AFV Club.
In stock
30.76 €
AMMO of Mig JimenezA.MIG-7036

Leather Figures Set

Leather Figures Set from AMMO of Mig Jimenez is a set of six acrylic paints for figures, put together for painting leather and leather equipment.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.