1:32 Ukrainian Su-27P1M Flanker B decal sheet

A decal sheet for the Ukrainian Su-27P1M Flanker B in 1:32 scale from HAD models is intended for large models of the heavy twin-engine fighter.

Scale1:32
Manufacturer HAD models
Product EAN8591111720977

Responsibility details are not available.

39.16 €
32.36 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ukrainian Su-27P1M Flanker B, Decals in 1:32 Scale (HAD models)

A stand-alone decal sheet from the Hungarian manufacturer HAD models, aimed at the Ukrainian modernized version of the Su-27 interceptor with the designation P1M. It is neither a kit nor an accessory part: the decals are applied to a finished painted model and change its markings. The 1:32 scale means large areas and correspondingly large markings, which makes the application striking but at the same time less forgiving of mistakes.

The real subject

The Su-27 is a heavy twin-engine fighter with its characteristic blended transition between fuselage and wing and with a pair of vertical tails. The P version was conceived as an interceptor, that is aimed at the defense of airspace, and the modernization designated P1M brought changes to the avionics and the equipment of aircraft in Ukrainian service. For a modeler this is an attractive subject: the aircraft is large, its finishes tend to be broken up and both the national and the serial markings are clearly apparent on the large areas.

Application tips

With large decals work in sections and do not hurry. The model has to carry a gloss varnish and be perfectly dry. Leave a large decal in the water only briefly and carry it to the spot together with its backing paper, sliding it off only there, otherwise it will wrinkle or fold over on itself. Bring the position right with a soft brush and a little water, then press the water out from underneath, from the center toward the edges. On intricate areas, the transitions of the fuselage and up against engraved lines, apply a decal softener and let it work without interference. Once dry, check the edges, prick any bubbles with the tip of a scalpel and brush the softener over again. Finally give the whole model a varnish, so that the sheen is unified and the edges of the carrier film disappear.

Who the set is for

  • Builders of large Su-27 models in 1:32 scale
  • Those interested in the hardware of the Ukrainian Air Force
  • Modelers who want the modernized version instead of the markings the kit starts from
  • More experienced builders used to working with large decals

This is a stand-alone decal sheet. The kit, paints and varnishes are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a stand-alone decal sheet intended for a finished painted model. The Su-27 kit in 1:32 scale has to be bought separately.

A large decal is left in the water only briefly and carried, together with its backing paper, right to the spot where it goes. It is slid off only there and the position is brought right with a soft brush and a little water.

Prick it with the tip of a scalpel and brush the softener over again. The air escapes that way and the decal settles.

The exact contents are given in the instructions enclosed with the sheet. The sheet is aimed at the markings of the Ukrainian Su-27P1M.

Last seen

HAD modelsHAD320921:32

1:32 Ukrainian Su-27P1M Flanker B decal sheet

A decal sheet for the Ukrainian Su-27P1M Flanker B in 1:32 scale from HAD models is intended for large models of the heavy twin-engine fighter.
In stock
39.16 €
Art ScaleASKM483201:48

1:48 F-16A MLU double-sided fit and self adhesive express mask for Kinetic

Art Scale 1:48 double-sided F-16A MLU masks are self-adhesive Express masks for cleanly masking the canopy glazing while painting a model.
In stock
7.96 €
AML DecalsAMLC1440241:144

1:144 German Aces in Focke-Wulf Fw-190 A - Part I

1:144 German Aces in Focke-Wulf Fw-190 A, Part I is a set of waterslide decals with the markings of the machines of German fighter aces on Fw-190 A aircraft.
In stock
2.76 €
LACILAC1441751:144

1:144 P-3C Orion Flaps for XScale Kit

Extended landing flaps for the Lockheed P-3C Orion patrol aircraft in 1:144 scale are cast in resin and replace a section of the plastic wing.
In stock
19.96 €
BlackSnake ModelWaffen-08-091:35

1:35 German Waffen Soldier Execution Set

A resin figure set in 1:35 scale capturing a dramatic scene with German soldiers of the Second World War. Highly detailed 3D-printed parts intended to be assembled and painted into a diorama.
In stock
21.96 €
Amusing HobbyAH35A0531:35

1:35 Russian Main Battle Tank T-90A & Uran-9

An Amusing Hobby kit in 1:35 scale with the Russian T-90A main battle tank and the Uran-9 unmanned vehicle brings two subjects together in one box. It is supplied unassembled and unpainted.
In stock
69.96 €
Mantis MiniaturesMANMAC551:35

1:35 Head Set Asian #1

1:35 Head Set Asian No. 1 is a resin set of replacement heads with Asian facial features from Mantis Miniatures. An accessory for converting figures in 1:35 scale, not a figure in its own right.
In stock
17.16 €
KelikRSK48-00681:48

1:48 F-14A TOMCAT LATE INTERIOR 3D DECALS FOR TAMIYA KIT

F-14A Tomcat late version interior 3D decals in 1:48 scale from the maker Kelik. An accessory for the cockpit detail of a model, not a kit.
In stock
29.56 €
LZ modelsLZ359251:35

1:35 LRDG Crew Vol.1 - Driver

A driver of a Long Range Desert Group patrol , the first series of figures. A resin part in 1:35 scale.
In stock
9.56 €
MINI GTMIGT00874-BL1:64

1:64 Lincoln Capri Hot Rod 1954 'Shadow Puppet' MINI GT x MIZU Diecast 2024 (Blister Packaging)

The Lincoln Capri of 1954 converted into a hot rod, in the Shadow Puppet color form of 2024. A metal casting in 1:64 in a hanging blister.
In stock
16.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.