LAST CHANCE! 20% OFF Ends Tonight!
1:32 British Wicker Seat Full Back - Short and Tall No Leather Pad

1:32 British Wicker Seat Full Back - Short and Tall No Leather Pad

11.56 €
Add to Cart

1:32 British Wicker Seat Full Back - Short and Tall No Leather Pad

A resin set of wicker seats, British Wicker Seat Full Back, Short and Tall, No Leather Pad, in 1:32 scale from GasPatch models. A full back without the leather pad, in the short as well as the tall variant.

Scale1:32
Manufacturer GasPatch models
Product EAN8591111241175

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A wicker seat with a full back 1:32, short and tall, without a leather pad

An accessory for models of British aircraft of the First World War in 1:32 scale. It is not a kit of an aircraft but an interior part on its own: a wicker seat in the form with a full back and without a leather pad on the top edge. According to the name the set includes the short as well as the tall variant, so it covers various types of cockpit.

What the part replaces and why it is worth it

British aircraft of that time had seats woven from wicker, light, cheap and well ventilated. The woven structure, though, is practically unattainable for injected plastic: the part from the box tends to be either smooth with suggested engraving, or it has a weave so coarse that it merges once it is painted. And yet in an open cockpit in 1:32 scale the seat is one of the first things that are visible. A separately made resin part takes thin walls, openings between the strands and sharp transitions, so the weave looks like a weave and not like engraving. The swap takes a few minutes and transforms the overall impression of the interior more than most other modifications of the same effort.

Usage and painting tips

Wash the parts in lukewarm water with a detergent so that the release agent disappears. Separate them from the carrying block with a fine saw, never by breaking, as the thin rods of the weave are fragile. They are glued with cyanoacrylate glue, in small doses applied with a pin. The painting: a light ocher or straw base, a brown wash over it that will run between the strands and draw the weave out, and finally a dry brush with a paint a shade lighter on the raised places. A matte varnish holds the overall impression of a natural material. Belts for the seat are not part of the set unless it is stated, so reckon with them separately.

Who the set is for

  • Builders of British aircraft of the First World War in 1:32 scale
  • Modelers who want an open cockpit without a smooth plastic seat
  • Those who need to choose between the short and the tall variant
  • Anyone interested in a quick improvement of the interior

This is an accessory, not a model in its own right. It is supplied unpainted, and glue, paints and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The back is woven as one whole, without a cut-out opening. A different variant with the same basis has the back pierced, the so-called perforated one.

The name states the short and the tall variant, that is two forms. Check the exact number of pieces against the details on the box of the set.

A light ocher base, a brown wash in the recesses between the strands and a light dry brush with a lighter shade on the raised parts. A matte varnish at the end.

Reckon with obtaining them separately. Check the contents of the package against the details on the box of the set.

Last seen

GasPatch modelsGP22-322451:32

1:32 British Wicker Seat Full Back - Short and Tall No Leather Pad

A resin set of wicker seats, British Wicker Seat Full Back, Short and Tall, No Leather Pad, in 1:32 scale from GasPatch models. A full back without the leather pad, in the short as well as the tall variant.
In stock
11.56 €
eEXM GIG-C02 Provedel (Type-Command 02)-25 %Stock ClearanceFavorite
BandaiBAN66276

eEXM GIG-C02 Provedel (Type-Command 02)

A kit from a modular line conceived as a building system. The construction reckons on weapons and attachments being changed; the parts click together and can be transferred between models of the same line.
Last one!
66.36 €49.76 € You save 16.60 €
KelikRSK35-00241:35

1:35 “HUMVEE” HMMWV M1036 with TOW Desert version Interior 3D Decal for Italeri kit

HMMWV M1036 with TOW, desert version in 1:35 scale is a set from the Kelik brand for rendering the interior of the vehicle from the Italeri kit in a light desert finish.
In stock
11.16 €
1:48 Spitfire Mk.II
-20 %
Favorite
EduardEX11101:48

1:48 Spitfire Mk.II

1:48 Spitfire Mk.II is a set of pre-cut Eduard masking templates for covering the glazing and other areas while spraying a model of the British fighter in 1:48 scale.
In stock
7.80 €6.24 € You save 1.56 €
KelikRSK48-00851:48

1:48 KI-21 interior 3D decals for ICM kit

Kelik 1:48 Ki-21 – interior 3D decals are color self-adhesive 3D decals for a faithful interior of the Japanese bomber. The decals are shaped to the parts of the ICM kit.
In stock
19.56 €
1:32 Jack stand set Luftwaffe (3D print)
-20 %
Favorite
3DF3DF1032041:32

1:32 Jack stand set Luftwaffe (3D print)

The printed set of Luftwaffe jack stands in 1:32 from 3DF will complete an aircraft or a diorama with the ground equipment used in maintenance.
In stock
17.96 €14.37 € You save 3.59 €
PanzerkraftELP35001-11:35

1:35 Panzer III L/M stowage rack, used in 2. SS Division Das Reich for Dragon and RFM kits

Panzer III L/M - a stowage rack 1:35 is a resin detail accessory from the maker Panzerkraft, which adds a period frame for stowing loads and personal gear to a model of the tank.
In stock
7.96 €
1:48 Ki-61 Hien wheel bay plugs (for Tamiya)
-20 %
Favorite
OmaskOMK748391:48

1:48 Ki-61 Hien wheel bay plugs (for Tamiya)

Masking Plugs for the Ki-61 Hien Wheel Bays, 1:48 are foam inserts that reliably cover the wheel bay space while spraying.
In stock
3.20 €2.56 € You save 0.64 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.