20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 Yakovlev-38/38M (Hobbyboss)

Yak-38 and 38M – a masking set in 1:48 (SX-Art) is a set of pre-cut templates for the kit of this shipboard aircraft from the maker Hobby Boss. It is an add-on to a model, not a kit.

Scale1:48
Manufacturer SX-Art
Product EAN8591111463720

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Yak-38 and 38M, a masking set in 1:48 (SX-Art)

A set of pre-cut masking templates from the SX-Art brand for a model of the Yak-38 aircraft and its 38M version in 1:48 from the maker Hobby Boss. The templates follow the shapes of a particular kit, so when painting you have nothing to trace or cut out with a scalpel. The set does not take the place of the model in itself; it is an add-on to the build.

The real subject

The Yak-38 is a single-seat shipboard aircraft with a short takeoff and a vertical landing, made for operating from ships. Its lift engines behind the cockpit, the grilles and doors in the upper part of the fuselage and the swiveling nozzles at the sides are characteristic. The 38M version differs from the basic pattern in details of the airframe and the equipment, so it is worth comparing the assembly instructions before you start masking.

Where the pattern begins and ends

Shipboard machines often have their color boundary laid out differently from land-based aircraft: the pattern on the upper surfaces ends at the edge of the wing and the underside goes over into a light shade along a sharp line on the sides of the fuselage. On the Yak-38 that line is complicated by the intake doors and the outlet openings on the spine, where the pattern has to carry on across steps in the surface. A template helps above all where a surface goes from flat to convex and where tape would crumple. It pays to mask in sections, let each color set and only then stick the next template on, so that a fresh film does not tear. Once the mask is off, go over the crossing of the rivet lines with a light overspray, so that the edge does not read like a stuck-on strip.

Tips and who the set is for

  • For builders of a Yak-38 or 38M model in 1:48 from the maker Hobby Boss
  • For modelers dealing with the continuity of the pattern across the doors and openings on the spine of the fuselage
  • Apply the paint in thin coats, so that it does not run under the edge of a template
  • Degrease the surface before sticking the masks on and let the base cure properly
  • Take the mask off while the paint is still flexible

This is a masking add-on, not a kit. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking add-on to the build. The Yak-38 kit has to be had separately.

According to the name, for a model of the Yak-38 and 38M in 1:48 from the maker Hobby Boss. On models from other brands the shapes need not fit.

The name gives both versions. Before painting, though, compare the shapes of the parts with the assembly instructions, as small differences between the versions do exist.

Press the edges down firmly with a toothpick, spray thinly and at lower pressure, and lead the first coat perpendicular to the edge rather than at an angle.

Last seen

SX-ArtSXA480961:48

1:48 Yakovlev-38/38M (Hobbyboss)

Yak-38 and 38M – a masking set in 1:48 (SX-Art) is a set of pre-cut templates for the kit of this shipboard aircraft from the maker Hobby Boss. It is an add-on to a model, not a kit.
In stock
4.76 €
1:16 French Kepi
-20 %
Favorite
Firma4949F014/161:16

1:16 French Kepi

1:16 French Kepi is a resin set of two French kepis for large figures in 1:16 scale from the Firma49 brand.
In stock
5.96 €4.77 € You save 1.19 €
A&A ModelsAA720331:72

1:72 Northrop F-15A Reporter

Northrop F-15A Reporter — a kit of the unarmed photo-reconnaissance aircraft derived from the P-61 Black Widow, 1:72 scale, a new tooling from 2024.
In stock
47.16 €
Kits-WorldKWB48-4991:48

1:48 RAF Wildenrath, West Germany, 1967. 675mm(W) x 675mm(H)

A printed display base for a 1:48 model with the motif of RAF Wildenrath air base in West Germany as it was in 1967. The 675 x 675 mm area serves as a base for a display case and for photography.
In stock
25.16 €
DecalcasDCL-PAR0971:12

1:12 Dzus quick release fasteners - Type 1

1:12 Dzus quick release fasteners - Type 1 from Decalcas are quick release panel fasteners for car models in 1:12 scale.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.