20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:72 Supermarine Spitfire wheels w/ weighted tyres of diamond pattern & 5-spoke hubs

1:72 Supermarine Spitfire wheels w/ weighted tyres of diamond pattern & 5-spoke hubs

5.96 €
Add to Cart

1:72 Supermarine Spitfire wheels w/ weighted tyres of diamond pattern & 5-spoke hubs

Armory 1:72 Supermarine Spitfire wheels with a diamond tread pattern and five-spoke hubs is a resin set that replaces the plastic wheels from the kit. The tires are cast with a weighted tire effect and the hub has five spokes.

Scale1:72
Manufacturer Armory
Product EAN8591111696425

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Armory 1:72 Spitfire wheels, a diamond tread pattern and five-spoke hubs

This is an accessory wheel set in 1:72 scale from the Armory company, not a model of the aircraft. The set is intended for kits of the Supermarine Spitfire fighter and represents the form with a diamond tread pattern and a hub with five spokes. This pair of features sets it apart from the other Spitfire wheel sets from the same manufacturer.

How they differ from the wheels in the box

The diamond pattern is made up of a dense mesh of small fields that injection-molded plastic cannot cast in this scale, and the parting line across the tread breaks it up as well. A resin casting is one piece and the pattern on it stays legible even after the paint has been sprayed on. What shows most, though, is the weighted tire effect: the lower part of the tire is flattened the way the rubber sits under the weight of the aircraft.

The real subject

The Supermarine Spitfire was a single-engine fighter with main landing gear retracting outward from the wing root; the wheel track was narrow as a result, and the landing gear is one of the prominent recognition features of the type. Several types of hub and several tread patterns were used on it during production, so the combination of pattern and hub is a recognition detail of a particular machine.

Building and painting tips

Wash the parts in warm soapy water and let them dry, otherwise the mold release residue will keep the paint off. Cut the casting blocks off with a saw or a knife, do not snap them, and level the mating surface with a file; sand wet or with a respirator. They are glued with cyanoacrylate glue (super glue). Apply a primer, spray the tire dark gray and paint in the spokes of the hub with a brush; fine dry dusting in a lighter shade brings out the engraving of the pattern nicely. Seat the wheel with the flat area pointing straight down.

Who the set is for

  • Builders of the Spitfire in 1:72 with a diamond tread pattern and a five-spoke hub
  • Modelers who want a legible tire pattern even in a small scale
  • Those who want the model standing on loaded tires
  • Modelers with experience of resin and cyanoacrylate glue

The set is an accessory, not a kit of the aircraft. It is supplied unpainted; glue, paints and the base kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a wheel set in resin with which you replace the plastic wheels supplied in a Spitfire kit in 1:72 scale during the build.

The tread of the tire is covered by a mesh of small diamond-shaped fields. Other sets from the same manufacturer have a block, linear or completely smooth pattern.

It is an intentional weighted tire effect imitating rubber compressed by the weight of the aircraft, not a fault of the casting.

Wash the parts in warm soapy water, cut off the casting blocks, sand the area down with respiratory protection, glue with cyanoacrylate glue and apply a primer before painting.

Last seen

ArmoryARAW724271:72

1:72 Supermarine Spitfire wheels w/ weighted tyres of diamond pattern & 5-spoke hubs

Armory 1:72 Supermarine Spitfire wheels with a diamond tread pattern and five-spoke hubs is a resin set that replaces the plastic wheels from the kit. The tires are cast with a weighted tire effect and the hub has five spokes.
In stock
5.96 €
ArmoryARAW484191:48

1:48 Supermarine Spitfire wheels w/ weighted tyres of block pattern & 4-spoke hubs

Armory 1:48 Supermarine Spitfire wheels with a block tread pattern and four-spoke hubs is a resin set that replaces the plastic wheels from the kit. The tires have a weighted tire effect and the hub is lightened by four spokes.
In stock
7.96 €
SX-ArtSXA390341:35

1:35 Grenade launcher

Soldier with a grenade launcher 1:35 is a resin figure of a fighter with a grenade launcher in 1:35 scale from the SX-Art brand, intended for dioramas and vehicle scenes.
In stock
13.96 €
1:72 Grumman A-6E TRAM Intruder-25 %Stock ClearanceFavorite
EduardED738451:72

1:72 Grumman A-6E TRAM Intruder

An Eduard photo-etched metal set in 1:72 scale for a model of the Grumman A-6E TRAM Intruder carrier-borne attack aircraft. The kit is not part of the delivery, unless stated otherwise.
5 leftof 12
23.60 €17.72 € You save 5.88 €
GAS HANSGH-NB02001

Hexagonal Bolt w/Washer 0.3 mm

GAS HANS hexagonal bolts with a washer, 0.3 mm are fine 3D-printed resin parts for superdetailing models. It is an accessory for advanced builders.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.