A set of covers and plugs with Remove Before Flight tags for a model of the F-16CG/CJ in 1:32 scale, cut for the Academy kit.
Responsibility details are not available.
Covers and plugs that are fitted to a real aircraft while the machine is on the ground: they cover intakes, sensors and other openings so that dirt does not get into them. They carry conspicuous Remove Before Flight tags precisely so that they are not forgotten before takeoff. The set is listed for a model of the F-16CG/CJ in 1:32 scale and is cut for a kit from Academy.
The accessory makes sense on a model built as a machine on the ramp or under maintenance, not on an aircraft portrayed in flight. It breaks up the uniformity of the surface, adds a warm color to the model and tells the viewer at once what situation the machine is caught in. It goes well with a ground crew figure and with items of equipment around the aircraft. How many parts the package contains and where each of them belongs is given in the manufacturer's instructions.
Cut the excess material off with a sharp blade a little way from the part and sand the rest away carefully. Check whether cement for plastic models has any effect on the material; if not, use super glue and roughen the glued area slightly. The tags stand out when a saturated color is laid over a light base, and the lettering on them looks more believable suggested than legibly written out. Glue the parts on at the very end, once the finish of the model is complete.
The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
