Masks for the cockpit glazing and the wheels for a model of the North American B-25 Mitchell in 1:48 scale, cut for the B-25G and related forms.
Responsibility details are not available.
The North American B-25 Mitchell was an American twin-engine medium bomber with piston radial engines and twin vertical tails. It served on every front of the Second World War and saw many forms, which differed mainly in armament and in the layout of the nose. The B-25G version carried a heavy cannon in the nose, while the older B-25B and B-25C had a glazed nose for the navigator and the bombardier.
The set contains masks for the cockpit glazing and for the wheels. On the B-25 the glazing has many frames and masking it with tape by hand is slow, so pre-cut elements save the most work precisely there. The wheel masks cover the tire while the disc is sprayed, so the boundary is managed without going round it by hand with a brush. The set is meant for the B-25G form and according to the manufacturer it fits the B-25B and B-25C and forms close to them as well; check the particular kit in the instructions.
First wash and degrease the areas. Lift the elements with tweezers, lay them on the frame and press the edges down carefully, so that no paint seeps underneath. Apply thin coats, as a thick coat builds up under the edge and leaves a step once the mask is removed. On the wheels, mask the tire and spray the disc rather than the other way round. Take the masks off once the paint has dried and peel them at an angle across the edge.
The aircraft kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!