Boeing 757-200 high-lift flaps 1:144 is a resin accessory for the Minicraft Boeing 757-200 kit that replaces the retracted devices with extended flaps.
Responsibility details are not available.
A resin accessory in 1:144 scale for a model of the Boeing 757-200. The set is cut for the kit of this aircraft from Minicraft, which is an essential detail here: another flap set for the same type exists under a very similar name, and it is precisely the kit they are intended for that tells the two items apart. Choose, therefore, according to the kit you have at home. This is not a model of the aircraft but replacement parts for the trailing edge of the wing.
The Boeing 757-200 is a narrow-body twin-engine airliner with a fairly slender fuselage and a wing sized for short runways and steep climb. Its high-lift devices are among the prominent elements of its silhouette; in the extended position the trailing edge steps apart into several tiers and flap track fairings appear under the wing. A model in the landing configuration therefore looks quite different from the same aircraft with a smooth wing in the cruise position.
Proceed in the order measure, dry-fit, only then cut. The cut into the trailing edge is irreversible, so first mark the exact position with a pencil according to the resin parts. Wash the castings in lukewarm water with detergent and cut the casting blocks off with a saw, and only then level the surfaces with a file. Glue with cyanoacrylate glue and watch the angle of extension so that the flaps are drooped equally on both halves of the wing, since asymmetry is visible on the finished model at first glance. Paint the inner surfaces and the space under the flaps before you close the assembly up.
The accessory is supplied unassembled and unpainted. Glue, paints and the base kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
