1:16 firefighter with a hose 1983 is a collector's modeling figure in the large 1:16 scale depicting a firefighter with a hose of 1983.
Responsibility details are not available.
This detailed modeling figure in the large 1:16 scale captures a firefighter with a fire hose during an incident, in the form of 1983. It is a resin, or in some cases 3D-printed, figure to be assembled, cleaned up and painted by hand. The large format makes it possible to work the turnout gear, the equipment and the face out in high detail.
A figure of a firefighter hauling or holding a hose is a typical element of incident settings. The form of 1983 matches the period gear and equipment of the Czechoslovak fire services of the 1980s. The large 1:16 scale stands out as a collector's figure on its own and as the dominant element of a smaller scene.
Wash the remains of the mold release agent off the parts, cut off the casting blocks or the print supports and sand down the parting lines. Glue with cyanoacrylate glue (super glue). Once a base coat of primer has been applied, paint the turnout gear and the face with acrylic or oil paints; layered shading and a dry brush will underline the texture of the gear and the folds of the cloth.
The figure is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
