1:35 Daimler AC Road wheels (Dunlop)

Resin wheels in 1:35 scale for the British Daimler armored car with a tread of the Dunlop pattern, cast in one piece and with no mold parting line on the tire.

Scale1:35
Manufacturer PANZER ART
Product EAN9991111315112

Responsibility details are not available.

14.36 €
11.87 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wheels for the Daimler Armoured Car in 1:35 scale, the Dunlop pattern

An add-on set of wheels in cast resin for models of the British Daimler armored car in 1:35 scale. The set replaces the wheels supplied in the kit and is intended for modelers who are bothered by the mold showing on the tire from the box.

A mold parting line is the hardest defect to repair on a tire

On a wheel it is exactly the hardest thing to clean that shows the most: the parting line running around the circumference across the whole tread. The pattern gets scraped away by it, after sanding a matte band of a different structure from the rubber around it is left, and under a coat of matte paint the marks of the abrasive come out even more. A resin casting goes round this problem, because it is poured into a soft mold and the tire stays whole around its circumference.

What subject the wheels belong to

The Daimler Armoured Car was a British four-wheeled armored reconnaissance car of the period of the Second World War, used by reconnaissance regiments and, after the war, still in service outside Europe for a long time. The cars were given tires from several suppliers, so the tread pattern is a legitimate distinguishing feature between variants of the same set. This one carries the pattern of the Dunlop brand, that is of the British maker that commonly shod British equipment of the time.

Tips for working and painting

Wash the castings in water with detergent and let them dry properly. The casting block tends to be placed on the mating surface toward the disc or on the inner side; cut it off with a saw and level the surface on abrasive paper laid on a board, so that the wheel seats square. Spray the rubber in a dark gray rather than black, and deal with the difference against the rim by shade rather than by going round it with a brush.

Who the set is for

  • Modelers of British subjects of the Second World War in 1:35 scale.
  • Builders who want the vehicle on a base with the wheels visible from close up.
  • Collectors of variants who distinguish the suppliers of tires.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They differ in the definition of the tread according to the supplier of the tires. The choice is made from a period photograph of the particular car; otherwise the two variants are equivalent.

Usually the original wheel is cut off and the new one is fitted onto the stub axle. The exact way it seats depends on the kit you are building.

Yes, only the surface has to be washed free of the mold release agent and primed. Without a primer the paint holds badly on resin.

Last seen

PANZER ARTRE35-7311:35

1:35 Daimler AC Road wheels (Dunlop)

Resin wheels in 1:35 scale for the British Daimler armored car with a tread of the Dunlop pattern, cast in one piece and with no mold parting line on the tire.
In stock
14.36 €
Black Dog modelBDA481011:48

1:48 48 F-14 D spine electronics

A set of the avionics in the fuselage spine for the Grumman F-14D in 1:48 scale. An accessory for a kit of the combat aircraft, not a model in its own right.
In stock
18.36 €
Green Stuff WorldGSW42973

Black MDF Vertical rack with 30 Drawers

Black MDF Vertical rack with 30 Drawers is a vertical rack in black MDF with thirty small drawers. What sets it apart from the other racks by the same manufacturer is precisely that high number of small drawers.
In stock
26.76 €
Green Stuff WorldGSW42980

Black Vertical Marker Organizer

Black Vertical Marker Organizer is a vertical organizer in black MDF built for markers and pens, not for bottles of paint and not for brushes. It is supplied unassembled and is built by gluing.
In stock
12.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.