A set of wheels in the Rotiform DIA pattern 20 inches in diameter for automobile models in 1:24 scale. A replacement for the wheels supplied in a kit.
Responsibility details are not available.
Rotiform is an American wheel make whose patterns appear above all on modified cars; the individual forms are told apart by a short abbreviation, in this case DIA. The twenty-inch size belongs to modern-day modifications, where a large wheel fills the arch and the sidewall of the tire stays low. In 1:24 scale, twenty inches corresponds to roughly 21 mm.
The set brings wheels in the DIA pattern in 1:24 scale as a replacement for the wheels from the box. It will find use on builds of modern cars to which the wheels are to give the character of a modified automobile, and where the parts from a kit do not have the drawing needed. The extent of the package, how the parts are divided and the recommended glue are given in the instructions enclosed by the manufacturer.
A large wheel will fit into the arch only when both the diameter and the width suit, so seat it dry first and compare it with the model; sometimes the arch has to be sanded out from the inside. Cut the excess material away with a sharp blade a little from the part and sand the remainder level. Wash and degrease the parts before painting. The rim comes across more faithfully when the metallic shade is completed with a dark lift between the spokes and the edges are left clean.
The set is for modelers who build modern automobiles in 1:24 scale and want a wheel in the style of modified cars. It is an accessory to building a model: paints, glue and tools do not belong to it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
