1:24 Sports battery

The sports battery 1:24 from the brand Yamamoto Model Parts is a detail part for the engine bay of a car model being built, not a kit in its own right.

Scale1:24
Manufacturer Yamamoto Model Parts
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A sports battery 1:24, a detail part from Yamamoto Model Parts

A small accessory for builders of car models in 1:24 scale. It is not a model of a car and not a part of one, but a free-standing part with which you replace the simplified battery from a boxed kit, or add a battery to a model where the basic box has none at all. Yamamoto Model Parts is a Polish brand specializing precisely in tuning details for car models.

What the accessory represents

The real subject is a small lightweight starter battery of the kind used in modified and racing cars. Against a production battery it has a smaller volume and a lower weight, and because it takes up little room, it tends to be moved away from the usual place by the radiator, into the luggage compartment or behind the seats, for the sake of weight distribution. Free space is then left in the engine bay, which shows on a model, so it pays to work out what leads to the battery as well.

Fitting tips

First wash the part in lukewarm water with dish soap, so that the remains of mold release agent disappear from the surface, as without that the primer holds badly. Separate it from the casting block with a fine-toothed saw or a cutting disc, not with sprue cutters, which could break it. Level the remainder of the gate with a file and sand the seating surface flat on a board with sandpaper; only then will the part sit on a floor or a fender with no gap. It is glued with super glue, and on a larger surface reach for the gel variant, which gives you time to adjust the position. Before painting, lay down a filler primer, which will also reveal fine scratches left by sanding. The terminals can be brought to life with a thin wire, and the hole for it is drilled with a micro drill at low speed.

Who the accessory is for

  • Builders of 1:24 car models who want to have the hood open
  • Modelers building tuning and drift versions with the battery moved
  • Those for whom the simplified part from a boxed kit is not enough
  • Beginners in working with resin, as the part is small and undemanding to clean up

This is an accessory to a model, not a kit in its own right. The part is supplied unpainted; glue, paints and wire are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a free-standing detail part in 1:24 scale, fitted into a car kit that is already built or still being built. You need to have the car model of your own.

Super glue based on cyanoacrylate, ideally in gel form, which gives you a few seconds to adjust the position. Ordinary cement for polystyrene does not work here.

Yes. Wash the remains of mold release agent off it in lukewarm water with dish soap, level the mark left by the casting block and lay down a filler primer. Without a primer the paint rubs off the smooth surface easily.

Last seen

Yamamoto Model PartsYMPTUN11:24

1:24 Sports battery

The sports battery 1:24 from the brand Yamamoto Model Parts is a detail part for the engine bay of a car model being built, not a kit in its own right.
In stock
3.56 €
Pimp My Miniatures16s-0361:16

1:16 Sd.Kfz 234 spare wheel type 4

The fourth rendition of the spare wheel for a large model of the German reconnaissance car. 1:16 Sd.Kfz 234 spare wheel type 4 suits the vehicle and works as a prop in a diorama.
In stock
11.16 €
ZvezdaZV62971:100

1:100 Soviet Light Tank BT-7M

Soviet Light Tank BT-7M is a plastic snap-fit kit of the Soviet fast tank in 1:100 scale from Zvezda, ideal for a quick build and for tabletop games.
In stock
5.96 €
HatakaHTK-C207

BS PRU Blue (BS381C:636)

The blue PRU Blue shade from the Hataka Orange Line range, listed in the British BS 381C standard under number 636. The color of the overall finishes of British reconnaissance aircraft.
In stock
1.56 €
Green Stuff WorldGSW1711

Round Display Plinth 4.5 cm - Black

Green Stuff World Round Display Plinth 4.5 cm - Black is a round wooden display plinth with a lacquered black surface for presenting figures.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.