1:24 Supermarine Spitfire Mk.VIII landing flaps is an Eduard photo-etched set for a more faithful rendering of the Spitfire's landing flaps in the large 1:24 scale.
Responsibility details are not available.
The set belongs to Eduard's full photo-etched range for the large scale and concentrates on a single assembly – the landing flaps and their surroundings. In 1:24 the thin metal surfaces are immediately apparent: at this scale plastic cannot be molded thinly enough to match the real thickness of sheet metal. The set is an accessory to a plastic model; it does not make an aircraft on its own.
The Spitfire had simple split flaps operated by compressed air, which knew only two positions – retracted and fully lowered. Pilots used them when landing and raised them again after touchdown, so in period photographs taken on the apron they are usually up. Modelers nonetheless like to show them lowered, because they reveal the space under the wing and break up an otherwise smooth lower surface. The Mk.VIII version came about as a full-fledged carrier of the two-stage Merlin, with equipment for service in the tropics and with a retractable tailwheel.
The plastic flaps are cut away and the area left behind has to be leveled so that the metal part sits down without a gap. Make the bends gradually, not in one stroke, and try them dry against the wing. Degrease the metal before painting and lay down a primer, otherwise the paint will come off during handling. It is a good idea to protect the finished assembly with masking tape until the model is complete.
This is an accessory; the plastic model is obtained separately.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!