12x D6 16mm Dice - Clear Red/Yellow

12x D6 16mm Dice - Clear Red/Yellow is a set of six-sided dice with a 16 mm edge in clear red and yellow, 12 pieces according to the name.

Manufacturer Green Stuff World
Product EAN8591111100793

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

12x D6 16mm Dice - Clear Red/Yellow

Transparent six-sided dice in the larger format with a 16 mm edge, in a red and yellow build from Green Stuff World. The figure 12x in the name gives the number of pieces in the set. Against the more common 12 mm dice it is a noticeably larger piece, which both holds and reads better.

When a roll should be visible across the whole table

A 16 mm die has a noticeably larger face area and therefore larger values too. That helps in two situations. The first is a game on a large table, where a fellow player sits far away and should see the result without standing up. The second is using a die as a counter, where it is not rolled but lies by a unit showing a state. In both cases the larger format pays off more than a larger number of small dice. The smaller number of pieces in the set matches the fact that dice this large are rolled a few at a time rather than by the handful.

Use at the gaming table

  • Rolls readable even from the opposite side of the table
  • Using a die as a counter for a unit's state
  • Playing with fellow players who do not get on with small dice
  • A companion to a larger set of smaller dice
  • Usable for board games and role-playing games as well

Who it is for

For players who find values harder to read on 12 mm dice, for games on large tables, and for anyone who uses dice as state indicators at the same time. It also suits a gift for a game someone already has at home.

The shade and the transparency may differ in a photograph depending on the lighting.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

In the larger edge, and therefore in larger values on the faces. A 16 mm die holds better and you will read it even from the opposite side of the table.

The figure 12x in the name matches twelve pieces. No further details about the package are stated here.

Rather rolls of a few dice and use as a counter. For large handfuls the smaller format is usually chosen.

Last seen

Green Stuff WorldGSW7491

12x D6 16mm Dice - Clear Red/Yellow

12x D6 16mm Dice - Clear Red/Yellow is a set of six-sided dice with a 16 mm edge in clear red and yellow, 12 pieces according to the name.
In stock
7.96 €
GunzeB511

Mr White surfacer 1000 170ml Spray

Gunze Mr. White Surfacer 1000 (170 ml Spray) is a white filling primer (surfacer) in a spray can from Gunze (Mr. Hobby). The 1000 grit fills fine scratches and creates a smooth light undercoat before painting.
In stock
9.80 €
1:72 Lockheed-Martin F-35A/F-35C-25 %Stock ClearanceFavorite
ReskitRSU72-01751:72

1:72 Lockheed-Martin F-35A/F-35C

The Reskit 1:72 set for the F-35A and F-35C Lightning II is a resin add-on to a kit, not an aircraft model.
4 leftof 6
8.76 €6.56 € You save 2.20 €
QuickwheelQW-1971:35

1:35 FV432 - Takom

The Quickwheel 1:35 masking set for the road wheels of the British FV432 armored personnel carrier is for the Takom kit. An aid for painting the wheels, not a model.
In stock
6.76 €
AberABRPP04

Engrave plate (88 x 57mm) - pattern 04

Aber Engrave plate (88 x 57 mm) – pattern 04 is an etched brass plate that serves as a die for creating relief surfaces. With it a modeler makes his own textured sheet to measure.
In stock
6.60 €
Mf zoneMFZ-P311:24

1:24 Bolts (B) 0.9mm (50pcs)

Bolts (B) 0.9 mm - 50 pieces is a set of 3D printed scale bolts of type B with a diameter of 0.9 mm for detailing car models in 1:24 scale from Mf zone.
In stock
29.96 €
Mantis MiniaturesMAN350441:35

1:35 U.S. Marine (Fallujah Iraq 2004)

A resin figure, U.S. Marine (Fallujah, Iraq 2004) , in 1:35 scale from Mantis Miniatures. It shows an American Marine from the fighting for Fallujah in 2004; a kit for advanced modelers.
In stock
15.96 €
1:700 Railings 45´ 2 bars long-25 %Stock ClearanceFavorite
EduardED990281:700

1:700 Railings 45´ 2 bars long

Ship railings 45 ft two bars (longer photo-etch) 1:700 is a photo-etched accessory from Eduard for building and detailing ship models. It is not a model but a set of fine metal railings to glue onto the deck.
Last one!
15.80 €11.84 € You save 3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.