1:35 FV432 - Takom

The Quickwheel 1:35 masking set for the road wheels of the British FV432 armored personnel carrier is for the Takom kit. An aid for painting the wheels, not a model.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quickwheel 1:35 FV432 — road wheel masks for the Takom kit

A masking set for painting the road wheels of the British FV432 tracked carrier in 1:35 scale. The set holds no building parts: the masks stick onto finished wheels and hold the edge between the rubber tire band and the rim while spraying. It is cut for the FV432 kit from Takom.

What makes the running gear of the FV432 special

The FV432 is a carrier with the drive sprocket at the front and the idler wheel at the rear, between which runs a row of road wheels of identical, fairly small diameter with a rubber tire band. Unlike tanks, where wheel diameters differ along one side, the road wheels here are practically identical and the only difference is between them and the drive sprocket and idler wheel. That has a practical consequence: the masks for the running gear are interchangeable with one another, but the toothed drive sprocket and the idler wheel will not be covered by them. The tire bands are also narrow, so every millimeter by which a mask overruns or fails to seat tells on them a great deal. The side plates shadow part of the running gear, but the lower arc of the wheels stays the best visible part at display-case eye level.

Choosing and preparing the paint

With a tire band as narrow as the FV432 has, you can afford to do without an airbrush. With a mask a brush will manage the rubber too, but two conditions apply: thin the paint almost to the consistency of milk and apply it by stippling square to the surface, not by stroking along the edge of the mask. A stroke along the edge literally sweeps the paint under the mask. The covering power of gray and black shades tends to be weaker, so count on three thin applications instead of one thick one — it dries faster and the edge stays sharp. An airbrush will do the same in two passes. The final surface should be matte, at most lightly satin in the places where rubber would have soaked up oil.

Who the set is for

  • Modelers of British postwar and modern armored equipment in 1:35 scale
  • Builders who work with a brush alone and still want a sharp edge
  • Those building several pieces of the FV430 family who want them uniform in color
  • Modelers bothered by a shaky rubber transition on a narrow tire band

This is a masking set, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Not necessarily. With a mask the narrow tire band of an FV432 can be painted with a brush as well, as long as you thin the paint a great deal and stipple it on square to the surface instead of stroking along the edge.

The set is prepared for the FV432 kit from Takom. With related vehicles and other kits, compare the wheel diameter and the width of the tire band first.

That is not stated here. On the FV432 the road wheels have a different shape from the toothed drive sprocket, so do not count in advance on the toothed ring being covered.

With dark grays and blacks the covering power tends to be weaker. Three genuinely thin applications give a cleaner result than one thick one that gathers at the edge of the mask.

Last seen

QuickwheelQW-1971:35

1:35 FV432 - Takom

The Quickwheel 1:35 masking set for the road wheels of the British FV432 armored personnel carrier is for the Takom kit. An aid for painting the wheels, not a model.
In stock
6.76 €
AberABRPP04

Engrave plate (88 x 57mm) - pattern 04

Aber Engrave plate (88 x 57 mm) – pattern 04 is an etched brass plate that serves as a die for creating relief surfaces. With it a modeler makes his own textured sheet to measure.
In stock
6.60 €
Mf zoneMFZ-P311:24

1:24 Bolts (B) 0.9mm (50pcs)

Bolts (B) 0.9 mm - 50 pieces is a set of 3D printed scale bolts of type B with a diameter of 0.9 mm for detailing car models in 1:24 scale from Mf zone.
In stock
29.96 €
Mantis MiniaturesMAN350441:35

1:35 U.S. Marine (Fallujah Iraq 2004)

A resin figure, U.S. Marine (Fallujah, Iraq 2004) , in 1:35 scale from Mantis Miniatures. It shows an American Marine from the fighting for Fallujah in 2004; a kit for advanced modelers.
In stock
15.96 €
1:700 Railings 45´ 2 bars long-25 %Stock ClearanceFavorite
EduardED990281:700

1:700 Railings 45´ 2 bars long

Ship railings 45 ft two bars (longer photo-etch) 1:700 is a photo-etched accessory from Eduard for building and detailing ship models. It is not a model but a set of fine metal railings to glue onto the deck.
Last one!
15.80 €11.84 € You save 3.96 €
1:48 Ilyushin Il-2 Stormovik LööK-25 %Stock ClearanceFavorite
EduardED6440861:48

1:48 Ilyushin Il-2 Stormovik LööK

Eduard LööK 1:48 Ilyushin Il-2 Shturmovik is a set with a resin instrument panel that comes finished and painted from the factory. It serves to replace the plastic panel in the cockpit of a model; it is not a kit.
2 leftof 4
9 €6.76 € You save 2.24 €
ELEFANTELE353061:35

1:35 German 2m antenna set with small base, 1 pcs.

German 2m antenna set with small base in 1:35 holds one resin antenna for armored vehicles.
In stock
4.76 €
DK DecalsDK480541:48

1:48 Westland Whirlwind Mk.I

Westland Whirlwind Mk.I decals 1:48 from DK Decals offer markings for the British twin-engined fighter bomber in 1:48 scale for several RAF machines.
In stock
11.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.