A 3D-printed AN/ALQ-101 jamming pod in the long form, 1:32 scale from Reskit is an external accessory for models of tactical aircraft, not a kit in its own right.
Responsibility details are not available.
This is an accessory for a model of an aircraft, not a kit. According to the name the set is produced by 3D printing and represents the AN/ALQ-101 electronic warfare pod in the long form. It is hung under the wing or on a fuselage station of a model in 1:32 scale and thereby adds equipment most kits do not have in the box.
The AN/ALQ-101 is an American jamming pod, that is, a carried housing with equipment for jamming the radar systems of air defense. It was used from the second half of the 1960s on tactical aircraft, among them the F-4 Phantom II, and other Western air forces used it too. It was made in several forms, which differed among other things in the length of the pod body: this set represents the longer variant. So go by the particular machine and period you are building when choosing.
Wash the 3D-printed parts first in warm water with a drop of dish soap and check whether any remains of supports are left on them; cut those off with a knife and sand the marks lightly. The surface of a print tends to have fine layering, which can be leveled with very fine abrasive paper and a coat of primer; the primer also unifies the color of the base and reveals any flaws. It is glued with cyanoacrylate glue (super glue). Deal with the painting according to the machine you are hanging the pod on; a fine wash will bring out the division of the panels and the small antennas.
The set is supplied unassembled and unpainted. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
