1:32 Douglas A-26B Invader 2 canopy masks (interior and exterior canopy masks) + 3 insignia masks

1:32 Douglas A-26B Invader 2 canopy masks (interior and exterior canopy masks) + 3 insignia masks

9.96 €
Add to Cart

1:32 Douglas A-26B Invader 2 canopy masks (interior and exterior canopy masks) + 3 insignia masks

Montex 1:32 Douglas A-26B Invader is a set of self-adhesive masks for the cockpit glazing from the outer and the inner side, supplemented with three masks for the national insignia. It is not a kit but an accessory for painting.

Scale1:32
Manufacturer Montex
Product EAN8591111000000

Responsibility details are not available.

9.96 €
8.23 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Montex masking set 1:32 Douglas A-26B Invader

A set of self-adhesive masks for painting the glazed parts of a model of the twin-engine Douglas A-26B Invader attack aircraft in 1:32 scale. According to the name it contains masks for two glazed areas, separately for the outer and separately for the inner side, and with them three masks for the national insignia. It is neither a kit nor a part of one but an accessory that markedly speeds up and sharpens the painting of the framing. The maker of the set is Montex.

The real subject

The Douglas A-26 Invader was an American twin-engine attack aircraft from the end of the Second World War. The A-26B version differed from the later variant with the glazed nose in having a solid unglazed nose with gun armament. The aircraft had a high speed for its category and, thanks to its robust design, stayed in service long after the end of the war. The glazed areas of the pilot's cockpit have fairly dense framing, so a model without masks means a lot of patient work with a brush.

Usage tips

Degrease the glazing first and let it dry thoroughly. Lift the mask out of the sheet with tweezers or a sharp point, seat it dry and then press the edges down with a soft tool, so that no bubble is left anywhere. It is a good idea to go over the edges of the mask with a thin coat of clear or of the base color, which seals any gap. Spray in thin coats and take the masks off while the paint is not yet fully cured. Use the inner masks before you glue the glazing into the fuselage. Apply the masks for the national insignia only onto a finished base and spray over them carefully from the center toward the edges.

Who the set is for

  • Builders of the A-26B Invader model in 1:32 scale
  • Modelers who want to spray the markings instead of applying decals
  • Those who paint with an airbrush and want sharp frame edges
  • Modelers who want to avoid going over a dense network of frames by hand

This is an accessory for painting, not a kit. The model, paints and glue are not included in the package. Before buying, check that the set matches the kit you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package contains only self-adhesive masks for painting. The model, paints and glue are not part of it.

With densely framed glazing, tape means slow cutting and a high risk of an inaccurate edge. Pre-cut masks match the shape of the frames and save time.

You spray the markings straight on with paint, so the carrier film of a decal falls away and with it the risk of silvering on a surface with many shapes.

The masks are cut to the shape of a particular model. The target kit is not stated here, so check that it matches beforehand.

Last seen

MontexMXMM321901:32

1:32 Douglas A-26B Invader 2 canopy masks (interior and exterior canopy masks) + 3 insignia masks

Montex 1:32 Douglas A-26B Invader is a set of self-adhesive masks for the cockpit glazing from the outer and the inner side, supplemented with three masks for the national insignia. It is not a kit but an accessory for painting.
In stock
9.96 €
MontexMXSM484781:48

1:48 De Havilland DH.110 Sea Vixen FAW.2 (inside and outside)

1:48 de Havilland DH.110 Sea Vixen FAW.2 (inside and outside masks) is a self-adhesive Montex masking set for the glazing frames. It is not a kit, but an accessory for a 1:48 model.
In stock
4.36 €
Thunder ModelTH352001:35

1:35 British Scammell Pioneer TRMU30/TRCU30 Tank Transporter 30 ton

Scammell Pioneer TRMU30/TRCU30 30-ton tank transporter in 1:35 scale is a plastic kit of the complete British transporter outfit from Thunder Model.
In stock
45.96 €
AberABR350L391:350

1:350 Set of 8 pcs 380 mm short barrels for ships Richeulieu, Jean Bart

A set of 8 turned brass 380 mm barrels for the Richelieu and the Jean Bart (1:350, Aber) for models of French battleships. A metal detail accessory replacing the plastic barrels of the main battery.
In stock
5.56 €
GasPatch modelsGP13-480271:48

1:48 WWI French Darne Lewis Half Heat Sinks Machine Guns (2pcs, Resin)

Darne Lewis machine guns with half heat sinks 1:48 (GasPatch, 2 pieces, resin) is a resin set of two French First World War aircraft Lewis guns for experienced modelers.
In stock
7.96 €
ETA dioramaETA5471:72

1:72/76 Flags Of The United Kingdom (WWI, WWII, Historical, Modern)

1:72 and 1:76 Flags Of The United Kingdom is a set of printed paper British flags from various periods for small dioramas.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.