Eduard 1:32 JP 233 dispenser PRINT is a set of printed parts of the JP233 dispenser in 1:32 scale. It goes under the fuselage of the model, between the outer stations - it is not an aircraft kit.
Responsibility details are not available.
Most accessories from the Czech maker Eduard deal with the cockpit or small airframe detail. This set is different: it belongs on the outside of the model, specifically under the fuselage between the stations. The JP233 dispenser is a bulky store that markedly changes the silhouette of a finished model, and in 1:32 scale it is already a large part where a good production technology pays off. The word PRINT in the product name refers to the printed form of the parts, which allows sharper edges and a finer surface texture than classic casting in a mold.
The JP233 is a British store for denying the use of airfield surfaces, carried under the fuselage of the Panavia Tornado combat aircraft. In design it is a set of long containers hung under the fuselage that empty downward in flight. For a modeler this means above all a large, angular volume under the lower part of the fuselage that markedly affects both the composition of the model and its stability on a base.
First wash the printed and resin parts in warm soapy water so no production residue is left on the surface and the primer holds. Cut the carrier blocks off with a saw or a cutting disc, not with nippers - they can crack. They are glued with super glue only. Use respiratory protection when sanding and sand wet. Given the weight of the parts, check whether the pylons on the model will take the load; reinforce them with a wire pin if needed.
This is an accessory, not an aircraft model. The basic kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
