1:32 Ki-43 II Hayabusa In&Out canopy masks

Ki-43-II Hayabusa canopy masks for the inner and the outer face, 1:32 deal with the canopy framing from both sides, so that the interior of the Hayabusa looks finished.

Scale1:32
Manufacturer Dead Design
Product EAN8591111732574

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Nakajima Ki-43-II Hayabusa - double-sided canopy masks, 1:32

A set of painting templates for the canopy glazing of a model of the Japanese Nakajima Ki-43-II Hayabusa army fighter in 1:32 scale. The set is cut for both faces of the clear part, that is for the outer surface and for the inner face of the frames. That is what sets it apart from the single-sided variant for the same type.

An interior you can see into

The Hayabusa was a light, agile fighter with a roomy, well-glazed cockpit and a canopy made up of several glazed panes. In a large scale that means a large area of clear plastic and a lot of frames. If they are painted only from outside, every frame seen from the side or from above gives away that it is transparent from inside. The inner masks make it possible to give the frames the interior shade, so that the cockpit holds together as a whole: a fitted-out seat and instrument panel then do not stand behind glass that is plainly painted only on the outside.

The inside before the outside

The inner face has to be sprayed before the glazing is fitted and glued to the fuselage. It pays to reckon with that while planning the build of the cockpit, not at the moment the fuselage is already glued.

Work tips

Degrease the clear part before applying and let it dry. Press the edges of the templates down with the blunt tip of a pair of tweezers, above all on narrow frames. Spray in thin coats and rather several times, so that no noticeable step builds up on the frame. Take the mask off once the paint has dried by pulling along the surface, never straight up and never with the edge of a knife.

Who the set is for

  • Builders of the Hayabusa with the canopy open or slid back
  • Modelers who have put work into fitting out the cockpit and want it to be seen
  • Those who are bothered by transparent frames when looking into the interior
  • Everyone who builds in a large scale, where the division of the canopy is readable

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the set contains templates for both faces of the glazing. The frame can be sprayed in camouflage from outside and in the interior shade from inside, so it looks right from both points of view.

On a model with the canopy slid back or removed and with a fitted-out cockpit. With the canopy closed the inner face of the frame is far less visible.

Before the glazing is fitted and glued to the fuselage, yes. After that the inner face of the frame can no longer be reached.

Once the paint has dried, with the blunt tip of a pair of tweezers and by pulling along the surface. Tearing it straight off or prying with a knife can scratch the clear plastic.

Last seen

Dead DesignVM320401:32

1:32 Ki-43 II Hayabusa In&Out canopy masks

Ki-43-II Hayabusa canopy masks for the inner and the outer face, 1:32 deal with the canopy framing from both sides, so that the interior of the Hayabusa looks finished.
In stock
11.16 €
SX-ArtSXA360421:35

1:35 BTR-70 holographic film (simulate optical instrument lenses)

Holographic film for imitating the optics of the BTR-70 in 1:35 scale from SX-Art will replace the flat plastic imitations of the lenses of observation instruments. It is not a mask set but ready-made clear elements to lay on.
In stock
4.76 €
AoshimaAO058951:24

1:24 Boxystyle TRH200V HIACE SUPER GL '10 TOYOTA

Toyota HiAce Super GL 2010 in the Boxy Style from the Japanese maker Aoshima is a plastic kit of a modified commercial vehicle in 1:24.
In stock
28.76 €
1:35 FRENCH TRAFFIC SIGNS 1930-40’s-25 %Stock ClearanceFavorite
MiniartMA356451:35

1:35 FRENCH TRAFFIC SIGNS 1930-40’s

A set of French traffic signs from the 1930s and 1940s in 1:35 scale. An accessory for a diorama that gives the scene both a place and a period.
6 leftof 8
12.36 €9.28 € You save 3.08 €
IBG modelsIBG320051:32

1:32 PZL P.11c Polish Fighter with Pilot and Ground Crew Figures

The fighter 1:32 PZL P.11c Polish Fighter with Pilot and Ground Crew Figures from IBG models is a large plastic kit completed with figures.
In stock
55.96 €
FineMoldsAA151:72

1:72 IJN A7M1/2 SAM (Reppu Photo-Etched Parts)

FineMolds 1:72 A7M Reppu photo-etched set is an add-on photo-etched set for sharpening up the details of a model of the Japanese Mitsubishi A7M Reppu fighter in 1:72 scale. It is not a kit but an accessory to a model.
In stock
15.56 €
HMH PublicationsDHC-002

Duke Hawkins Classic: North American T-6 Harvard / Texan

Duke Hawkins: North American T-6 Harvard/Texan is an illustrated walkaround detail guide to the famous trainer. A publication, not a kit.
In stock
22.76 €
MH modelsMHX320431:32

1:32 Curtiss P-40E Warhawk Markings Airbrush Mask for Trumpeter

Spraying masks for the markings of a model of the Curtiss P-40E Warhawk in 1:32 scale, cut for the kit from Trumpeter.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.