1:32 Ki-44 Shoki In and Out: a Dead Design set for the canopy framing from both sides of the glazing.
Responsibility details are not available.
The name of this item gives the rendition for the inside as well as the outside, and that is the whole difference from the set meant for the outer surface only. You get shapes with which to mask the panes off from the cockpit and from the surface alike, so the frame skeleton of the Shoki receives full color on both sides of the glass.
The Ki-44 had its cockpit set high above the engine cowling and a canopy with a prominent band of glazing along the sides. Such a cockpit can be seen into from the side even when it is closed, and a transparent frame there is glaring. Masking from both sides solves that problem once and for all and saves attempts to paint the frame in afterwards with a brush, which almost never turn out well.
Lay the work out over two days. The first day the inner side and the cockpit shade, the second day the outside and the camouflage. Before you set the canopy on the fuselage, test-fit it dry to see whether it matches; with the masks applied the part is a little thicker and can jam in a narrow cutout. Choose a glue that does not fog transparent surfaces and apply it in the smallest amount along the edge. It also pays to prepare the cockpit shade in advance: once you start on the inner side, mixing paint in the middle of the work only holds you up and risks a different tone between individual frames.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!