1:32 McDonnell F-4G Phantom II National Insignias

1:32 McDonnell F-4G Phantom II National Insignias

8.76 €
Add to Cart

1:32 McDonnell F-4G Phantom II National Insignias

The Dead Design 1:32 McDonnell F-4G Phantom II national insignia masking set for spraying the markings instead of using decals. It is not a model of the aircraft but an accessory for the build.

Scale1:32
Manufacturer Dead Design
Product EAN8591111732574

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dead Design 1:32 McDonnell F-4G Phantom II masking set, national insignia

A self-adhesive masking set from the Dead Design brand in 1:32 scale intended for spraying the national insignia onto a model of the McDonnell F-4G Phantom II. Unlike the sister items of the same range, which deal with the cockpit glazing, this set aims at the markings of the aircraft. It is neither an aircraft kit nor decals, but masks. The exact number of pieces and the extent of the markings are not stated here.

The real subject and the extent of the set

The F-4G is the two-seat variant of the Phantom II derived from the F-4E version, reworked for finding and suppressing ground radars. The national marking of US Air Force aircraft takes the form of a star in a circular field with bars on either side and repeats in several places on the fuselage and the wings. Spraying a marking beats a decal on two counts that matter at the bench: nothing glossy rings the motif, so no silvering shows, and pigment grips even where the camouflage is flat and broken up. That makes the set a choice for anyone who would rather have the insignia live in the paint than sit on it as a film.

How to use the masks

Everything rests on the state of the paint underneath: bone dry and smooth, or pigment creeps beneath the edge. Lift each piece into position, then work your way round it with a fingernail, taking broken-up areas a short stretch at a time. Lay down a pale ground coat before anything else, since the finishing shade has to read over dark camouflage, and bring in the colors of the insignia after that. Hold the airbrush square to the panel and keep the coats thin. When the last one has set, lift a corner with tweezers and draw the piece away almost flat against the skin of the model. Everything nearby wants shielding first, with tape or with masking putty.

Who the set is for

  • anyone putting together a Phantom II at 1:32
  • builders who would rather lay the insignia down with an airbrush than float it on from a sheet
  • people who have had decals silver on them over a flat finish
  • hands already used to masking work

This is an accessory for the build. The aircraft model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, they are masks. The marking is sprayed on through the mask, so it becomes part of the paintwork and no glossy film appears around the motif.

According to the name the set is aimed at the national insignia. The glazing is covered by other items of the same range; the exact contents of the package are not stated here.

Spray a light base inside the mask first and only then the target colors of the marking.

Last seen

Dead DesignNM320241:32

1:32 McDonnell F-4G Phantom II National Insignias

The Dead Design 1:32 McDonnell F-4G Phantom II national insignia masking set for spraying the markings instead of using decals. It is not a model of the aircraft but an accessory for the build.
In stock
8.76 €
Dynamo-ModelsDNM350961:35

1:35 French Commando Kieffer On The March No.4 (With Bicycle)

The variant complemented by a bicycle: French Commando Kieffer On The March No.4 (With Bicycle). 1:35 scale, made by Dynamo-Models.
In stock
14.76 €
Riich ModelsRN280051:350

1:350 USS Los Angeles Class Flight I (688) Attack Sumbarine

Riich 1:350 USS Los Angeles Flight I (688) is a plastic kit of the original version of the American nuclear attack submarine of the Los Angeles class in 1:350 scale.
In stock
19.96 €
Model SceneMSCF733

Pozdní léto - vápencové kameny L

Late Summer - Limestone Rocks L is a hand-made Model Scene scenic foliage mat combining grass growth with heavily rocky limestone terrain in late summer colors.
In stock
19.16 €
AIMSAIMS48P0191:48

1:48 Ju-88C-6 'Single B Stand' - Update Set (designed to be used with ICM kits)

The Ju-88C-6 Single B Stand update set (1:48) from AIMS is a resin set of replacement and additional parts for the night fighter version.
In stock
32.76 €
Plastruct PLT90004

Angle (1pcs) H 3.2, W 3.2, T 0.8, L 375 mm

The Plastruct angle is a precise plastic L section 3.2 x 3.2 mm across and 375 mm long for modeling structures and frames.
In stock
1.80 €
ReskitRSU48-03771:48

1:48 Ejection Seats MB Mk.10Q For Mirage 2000B, D, N (2pcs) (3D Printed)

Reskit 1:48 MB Mk.10Q ejection seats for the Mirage 2000B, D, N is a resin, 3D-printed accessory. A pair of faithful ejection seats for the cockpit of a model.
In stock
11.16 €
Voyager ModelPE351168A1:35

1:35 WWII Russian KV-1 Mod.1942 Basic (For TRUMPETER 09597)

A Voyager Model photo-etched set for the KV-1 heavy tank, model 1942, in 1:35 scale. An accessory to a plastic model that replaces thick plastic plates with thin brass.
In stock
21.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.