The stencils Me 109 E-3, national insignia and markings 1:32 are used to spray the German crosses and the additional markings directly in paint.
Responsibility details are not available.
The insignia is formed directly from the paint you use on the whole aircraft. It therefore cannot have a different sheen from the surface around it, and there is no risk of a silvery film appearing under it once dry, as sometimes happens with thin decals on a rough base.
The machines used over the English Channel carried angular crosses on the sides of the fuselage and on both surfaces of the wings, along with tactical numbers and additional squadron markings. In a large scale decals on a cross tend to be the most noticeable weak point of a model, because they follow every rivet and the overhang of the carrier film stays visible under a raking light. The size and placement of the insignia also differed by production series, so it always pays to work from the scheme of the machine you are building.
The base has to be smooth and fully cured, ideally polished with a gloss clear coat. Seat the stencil exactly according to the drawing in the kit, spray the light border first and the dark fill once that has dried. Be sparing with the paint: the thinner the coat, the less the transition at the edge will show. If a drop does escape under the edge, let it harden and remove it carefully, because smeared wet paint does far more damage.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!