Parts for the towing cables of British vehicles in 1:48 scale from Firma49 are made for the smaller scale, where a molded cable looks coarsest.
Responsibility details are not available.
A detail accessory in 1:48 scale from Firma49. The name defines its contents as parts for the towing cables of British vehicles. This is a standalone set for a model that is already built or part-built, not a kit of the vehicle.
In 1:48 the towing cable on the hull is barely a couple of centimeters long, so every simplified shape is more glaring than on larger models. A molded end fitting here takes up a fairly large part of the whole length of the cable, and it is exactly its replacement that shifts the appearance most markedly. For the cable itself, a very fine thread or a thin wire rope works best in this scale; coarser material would look like a hawser.
First lay the small parts out on a light surface so that you can see them. Open out the hole in the end fitting with a needle as required, fit the cable dry and only then fix it. Dose the super glue with the tip of a wire, because a drop from the bottle would flood the whole part in this scale and round off its edges. It also pays to work over a tray or a spread-out cloth: a part of this size that falls on the floor is hard to find. Apply the paint in thin coats so that the shape of the fitting stays visible.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
