Painting masks for spraying a model of the Japanese Ki-61-Id fighter in 1:72 scale, made for the Tamiya kit.
Responsibility details are not available.
Among Japanese fighters of the Second World War the Kawasaki Ki-61 Hien was an exception: instead of the usual radial unit it received a liquid-cooled inverted V12, and that is why it has the slender pointed nose that sets it apart at first glance from the other Japanese types. The Allies gave it the code name Tony. The Ki-61-Id version belongs to the later renditions of the first production series.
The set of masks is cut to fit the Ki-61-Id model in 1:72 scale from the manufacturer Tamiya, so the shapes sit on the particular parts without tedious trial and error. Masking the canopy frames with a knife directly on the model is work in which the clear part is easily cut into; ready-made masks take care of that for you.
Stick the masks on a clean, degreased surface before spraying and press the edges down properly, above all in the corners, where the paint most likes to bleed under. Apply the paint in several thin coats and let them flash off; a single thick coat soaks in under the edge of the mask and the edge spreads. Take the mask off while the paint is freshly dry, not after several days, when the finish peels off with it. The tip of a knife or tweezers with which you lift the mask by a corner will help.
For modelers who build Japanese fighters in 1:72 scale and want crisp transitions without cutting masks by hand. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!