A replacement angle of attack probe in the early version for models of the F/A-18E/F Super Hornet and the EA-18G Growler in 1:72 scale. A turned metal part.
Responsibility details are not available.
The F/A-18E and F/A-18F Super Hornet are American carrier-based multirole aircraft, and the EA-18G Growler is a machine built on the same airframe for electronic warfare. All of them carry an angle of attack probe on the sides of the forward fuselage. It is an inconspicuous rotating vane that sets itself into the airstream and gives the onboard systems the figure for the angle of attack. Neither the warning to the pilot in slow flight nor the precise guidance of the machine down the glide path when landing on an aircraft carrier, where even a small deviation matters, can do without it.
The replacement part in 1:72 scale is produced in the early version. It is a metal part, which pays off on a component this small and this exposed: metal stands the handling of a model better than a thin plastic molding and need not be oversized for the sake of strength.
Cut the original part from the kit off with a sharp blade and sand the surface level. Degrease the metal part before gluing, because on a smooth surface both glue and paint hold considerably worse than on plastic. It is glued with super glue applied in a minute amount; the joint will be stronger if the surface is roughened. Spray a thin coat of primer before painting, otherwise the paint will peel during handling. Fit the part at the end of the build, after spraying and drying, so that it neither breaks off nor bends.
For modelers who build the Super Hornet or the Growler in 1:72 scale and want to replace a coarser plastic component with a more accurate shape. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!