1:35 FUEL CAP SET FOR IDF SHOT KAL, NAGMASCHOT, NAGMACHON (VARIANT 1), 5 PCS.

1:35 FUEL CAP SET FOR IDF SHOT KAL, NAGMASCHOT, NAGMACHON (VARIANT 1), 5 PCS.

3.96 €
Add to Cart

1:35 FUEL CAP SET FOR IDF SHOT KAL, NAGMASCHOT, NAGMACHON (VARIANT 1), 5 PCS.

A set of fuel caps for the IDF Shot Kal, Nagmashot and Nagmachon, variant 1 in 1:35 scale from the manufacturer ELEFANT - five resin tank caps as a replacement for the simplified plastic parts.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Fuel caps for the IDF Shot Kal, Nagmashot and Nagmachon, variant 1, 1:35 (ELEFANT)

A small detail set in 1:35 scale with five fuel caps for Israeli vehicles built on the Centurion chassis. It is not a kit or a part of one - these are replacement parts that substitute for the flat, simplified caps from the mold of the basic model. The variant designation in the name refers to one of several cap types that appeared on the real vehicles; the manufacturer lists further variants within the same range.

The real subject

The Shot Kal is the Israeli version of the Centurion tank, rearmed and fitted with a new powerplant; from the same chassis then came the heavy carriers Nagmashot and Nagmachon. The fuel tank caps are among the most conspicuous small details on the upper surface of the hull - they are visible from an ordinary view of a model, they have a pronounced rim, a handle and fine cast markings. It is precisely such small items that tend to be simplified in injected plastic because of the direction in which the part leaves the mold.

Building and painting tips

The caps are small parts, so expect them to get lost easily - work over a tray or over a light cloth and use tweezers with fine tips. Cut them off the casting block with a fine-toothed saw, not with pliers, which would crush the casting. Level the seat in the hull so that the cap does not end up crooked; a part glued blind is immediately visible on a horizontal surface. It is glued with cyanoacrylate glue, best applied with a pin so that the excess does not flood the engraved detail. The caps are worth painting together with the whole hull and then merely darkening with a wash and lightly bringing out at the edges - on the real vehicles they tend to be scuffed from refueling and from the crew's boots.

Who the set is for

  • Modelers of Israeli equipment on the Centurion chassis in 1:35
  • Builders who replace simplified details from the mold
  • Diorama builders working with detail on the upper surface of the hull
  • Modelers used to handling very small resin parts

The set is an accessory for a model, not a kit in its own right. It is supplied unpainted; glue, paints and the basic kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name of the item, five pieces. That is enough for one model, with spares likely left over.

The manufacturer lists several numbered variants within this range, matching the different cap types on the real vehicles. Which type you need is decided by a photograph of the particular vehicle; the variant number is given in the name of the item.

As a rule it is enough to remove the original plastic cap and level the area, so that the new part seats flat. It does not call for any more extensive work on the hull.

Tweezers with fine tips are worth having, as is working over a tray and cutting off the casting block with a saw. Pliers would snap a small casting.

Last seen

ELEFANTEL350201:35

1:35 FUEL CAP SET FOR IDF SHOT KAL, NAGMASCHOT, NAGMACHON (VARIANT 1), 5 PCS.

A set of fuel caps for the IDF Shot Kal, Nagmashot and Nagmachon, variant 1 in 1:35 scale from the manufacturer ELEFANT - five resin tank caps as a replacement for the simplified plastic parts.
In stock
3.96 €
DN ModelsDN48/827-1741:48

1:48 F-100 Super Sabre Vietnam Era Camouflage Paint Masks Set

A masking set for the three-tone camouflage of the F-100 Super Sabre of the Vietnam War period, 1:48 scale. The films define the boundaries of the green and the brown fields and the division against the light underside.
In stock
23.16 €
New WareNWAM08211:48

1:48 Su-27 family EXHAUST NOZZLES PART B14 kabuki masks

The New Ware masking set for the engine nozzles of the Su-27 family in 1:48 scale is a narrowly focused accessory for spraying segmented nozzles. It is neither a kit nor a set of canopy masks.
In stock
4.76 €
Quinta StudioQD+486621:48

1:48 AV-8 B Harrier II Plus - 3D-Printed & Coloured Interior with 3D-Printed Resin Parts (for UMa Kits)

A detailed 3D decal color interior in 1:48 scale for the AV-8B Harrier II Plus ground-attack aircraft (for the UMa kit), with resin parts. It is not a model, but an accessory for a kit.
In stock
29.56 €
Kits-WorldKW3D14810791:48

1:48 Vought F4 U-4 Corsair 3D Colour Interior Cockpit Set (for Hobby Boss kits)

A full-color set of cockpit interior items with a raised relief for a model of the Vought F4U-4 Corsair in 1:48 scale, prepared for Hobby Boss kits.
In stock
13.16 €
Tetra Model WorksME-350501:35

1:35 T-54B Russian Tank Late Type Detail up Set for Takom

1:35 T-54B — a photo-etched detail set for the late form is an add-on photo-etched set for a plastic kit of the medium tank you already own, not the model itself. The intended kit is Takom.
In stock
21.16 €
Voyager ModelPE356521:35

1:35 Modern Canadian Leopard C2 MEXAS MBT(Gun barrel ,smoke discharger include) (For TAKOM 2003)

Voyager Model Leopard C2 MEXAS is a brass photo-etched set with a barrel and smoke dischargers for a model of the Canadian Leopard C2 MEXAS tank in 1:35 scale. The set is designed for the Takom 2003 kit.
In stock
35.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.