SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here
1:35 MAT-49 (6 Pcs) & French Grenades M37 8 Grenades Included.

1:35 MAT-49 (6 Pcs) & French Grenades M37 8 Grenades Included.

15.96 €
Add to Cart

1:35 MAT-49 (6 Pcs) & French Grenades M37 8 Grenades Included.

MAT-49 and French M37 grenades 1:35 is a resin accessory set from the brand Bravo 6 - six submachine guns and eight grenades. It is neither a model nor a figure but armament for a diorama.

Scale1:35
Manufacturer Bravo 6
Product EAN8591111000000

Responsibility details are not available.

15.96 €
13.19 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MAT-49 and French M37 grenades 1:35 - a Bravo 6 accessory set

A set of castings in resin in 1:35 scale from the brand Bravo 6. Note - it is neither a kit nor a figure but an accessory set of armament. It holds six pieces of the French MAT-49 submachine gun and eight M37 hand grenades. It serves to arm figures, to place around a diorama as laid-down kit or to replace the coarser plastic weapons from ordinary kits.

What the set is for

The MAT-49 submachine gun is a French post-war design with a sliding shoulder stock and a magazine housing that folds forward, thanks to which the weapon can be carried in a smaller volume. In modeling practice the set suits figures of French units in Indochina and scenes where these weapons appeared later in Vietnam. Six pieces in the package make it possible to arm a whole group of figures uniformly, and the grenades can be used both hung on kit and loose in a scene. Resin castings have markedly sharper detail than weapons molded from plastic in kits, mainly on the sights, the sling loops and the surface of the magazine.

Use and working

  • Wash the castings in lukewarm water with detergent - that way you remove the release agent from the mold
  • Cut the casting blocks off with a saw or a cutting disc and never break them away
  • Glue with cyanoacrylate super glue and support the thin parts while they dry
  • Sand wet and with respiratory protection
  • Apply a thin primer before painting, then combine metallic shades with a dark wash into the recesses

Who the set is for

The set is intended for builders of dioramas in 1:35 scale who want to raise the level of detail of the armament, and for modelers putting a scene with French units together. Experience of working resin and of handling fine parts is assumed.

The set is supplied unassembled and unpainted. Glue, paints and figures are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The set holds only the weapons and the grenades. Neither figures nor a base are included.

Six MAT-49 submachine guns and eight M37 hand grenades.

Yes, the 1:35 scale is standard. Sometimes the palms of the figure have to be adjusted so that the weapon sits properly.

They are glued with cyanoacrylate super glue. A primer is necessary before painting, and then ordinary modeling paints are used.

Last seen

Bravo 6B6-352041:35

1:35 MAT-49 (6 Pcs) & French Grenades M37 8 Grenades Included.

MAT-49 and French M37 grenades 1:35 is a resin accessory set from the brand Bravo 6 - six submachine guns and eight grenades. It is neither a model nor a figure but armament for a diorama.
In stock
15.96 €
Plastruct PLT90592

Profil Z (1 pcs) H-2,4mm W-1,4mm T-0,5mm L-250mm

The Plastruct Z section 2.4 x 1.4 mm across and 250 mm long is a fine plastic Z section for scratch-building.
In stock
1.40 €
Voyager ModelPE356981:35

1:35 US M103A1 Heavy tank Fenders (For DRAGON 3548)

Voyager Model 1:35 M103A1 — photo-etched fenders are an add-on set for a plastic kit you already own, not a standalone model. They replace the plastic fenders of the American heavy tank with thin metal sheet on the Dragon 3548 kit.
In stock
14.76 €
Quinta StudioQP720091:72

1:72 Typesetting Russian military license plates ~1993-Present (State Standart 50577-93) (All kits)

Russian military license plates, about 1993 to the present, 1:72 is a set of 3D-printed decals for setting license plates on vehicle models.
In stock
4.76 €
Red BoxRB721351:72

1:72 Moscow Noble Cavalry 16 c. (Battle of Orsha) Set 1

Moscow noble cavalry of the 16th century, the Battle of Orsha, set 1 is a set of mounted Red Box figures in 1:72 scale intended for scenes on an open battlefield.
In stock
11.16 €
EduardFE14571:48

1:48 SMB-2 Super Mystere seatbelts Israeli AF STEEL

Eduard SMB-2 Super Mystère steel photo-etched belts (1:48) are pre-printed seat belts for the pilot's seat for a faithful cockpit.
In stock
6 €
ReskitRS32-01951:32

1:32 Exocet missiles (2 pcs) (Dassault Super Etendard, Mirage 2000, Rafale, Mirage F1)

Exocet missiles (2 pcs), 1:32, Reskit is a 3D printed resin set of two anti-ship guided missiles for completing models of the Super Étendard, Mirage 2000, Rafale and Mirage F1.
In stock
15.16 €
Star DecalsSD72-A10961:72

1:72 Tiger I. sPzAbt 502 # 2. Early / Mid production Tigers.1943-45.

A sheet of decals in 1:72 scale with the markings of German heavy tanks Tiger I in the early and mid production versions. The second part of the series devoted to the battalion with the number 502.
In stock
8.36 €
HasegawaHA075581:48

1:48 F-16 CM-50 Fighting Falcon - F-16 Demonstration Team 2025

The injection-molded plastic kit Hasegawa 1:48 F-16 CM-50 Demonstration Team 2025 captures the machine of the American F-16 demonstration team for the 2025 season.
In stock
49.56 €
Pimp My MiniaturesDIO-0651:35

1:35 Primed brick wall with pillars & plain roof tiles (12,5 cm x 6,5 cm) - heavy cracked

Primed brick wall with pillars and tiles - heavily cracked (1:35) is a resin scenic element measuring roughly 12.5 x 6.5 cm for building dioramas in 1:35 scale.
In stock
25.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.