SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here
Takom Product Code: TKM2050X ★★★★★ 5 (1 ratings)

1:35 Maus V1 & V2 (2 in 1) Limited edition

The Maus V1 and V2 (2 in 1, limited edition) is a plastic kit of the German super-heavy tank in 1:35 scale from Takom. One box builds either of the two surviving prototypes.

Scale1:35
Manufacturer Takom
Product EAN8591111000000

Responsibility details are not available.

49.96 €
41.29 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Maus V1 and V2 (2 in 1) in 1:35 scale from Takom

Injection-molded plastic kit in 1:35 scale from Takom, issued as a 2 in 1 limited edition. From one box either of the two prototypes of the German Maus super-heavy tank can be built, that is the V1 as well as the V2. The model is meant to be glued and painted and the parts are injection-molded in plastic. The exact contents of the box (the number of sprues, any photo-etch or the marking scheme) are given by Takom on the packaging and in the enclosed instructions.

The real subject

The Panzerkampfwagen VIII Maus was a German super-heavy experimental tank of the end of World War II. It is the heaviest fully armored combat vehicle ever built, with a combat weight of around 188 tons. Only two prototypes were made, V1 and V2, and they never took part in the fighting. The first prototype was tested at first without a turret, while the second already received a complete turret with armament. The design tested the limits of what was feasible at all in armored vehicles and remains one of the best known dead ends of armor development.

Building and painting tips

With a hull of this size it pays to start from the running gear and from any interior, which you finish and paint before you close the hull for good, because afterwards there is no getting to it. Glue the plastic with a thin model cement and sand the joints over once they have dried. Apply a primer before painting and lay the shades on with an airbrush. The large vertical armor surfaces positively invite weathering: accentuate the rivets and the details with a dark wash, then create dust and mud effects with pigments around the running gear and on the lower part of the hull.

Who the model is for

  • for collectors and fans of German World War II armor
  • for modelers drawn to the heaviest tank in history
  • for more advanced builders, given the size and the amount of detail
  • a handy 2 in 1 box for comparing the two prototypes

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

5,0/5 ★★★★★★★★★★ from 1 ratings
5★1×
4★0×
3★0×
2★0×
1★0×
vit z. 13. 3. 2026 ★★★★★

nejlepší co sem kdy stavěl

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

From one box either of the two surviving prototypes of the Maus tank can be built, that is the V1 or the V2. You always build one model, though, and choose the version during the build.

No. Only two prototypes were made (V1 and V2) and they never took part in the fighting. It was an experimental super-heavy tank.

Given its size and the amount of detail it is rather a model for more advanced modelers, though a patient beginner will manage it.

Last seen

TakomTKM2050X1:35

1:35 Maus V1 & V2 (2 in 1) Limited edition

The Maus V1 and V2 (2 in 1, limited edition) is a plastic kit of the German super-heavy tank in 1:35 scale from Takom. One box builds either of the two surviving prototypes.
In stock
49.96 €
Rise144models144RM0511:144

1:144 Su-27 Boarding Ladder with Intake covers

A resin set for an Su-27 model in 1:144 scale — a boarding ladder and intake covers. It is an accessory to a kit, not a model of the aircraft.
In stock
4.36 €
AML DecalsAMLA320211:32

1:32 Messerschmitt Bf-109 G-4 W.Nr.14851 - Conversion Set

AML Bf 109 G-4 W.Nr.14851 1:32 - a conversion set for building one particular documented machine identified by its works number.
In stock
9.96 €
AiresAIR46441:48

1:48 F/A-18E Super Hornet exhaust nozzles - opened position

The F/A-18E Super Hornet exhaust nozzles in the open position are a resin detail set in 1:48 scale from Aires . An accessory for the kit of the single-seat Super Hornet, not an airplane model.
In stock
20.80 €
HaulerHLX481261:48

1:48 TIGER I EXHAUST COVER "initial prod." (TAMIYA)

Photo-etched exhaust covers for the Tiger I of initial production in 1:48 from the Czech maker Hauler are a small but markedly visible replacement for the plastic parts at the rear of a model.
In stock
8 €
LifecolorLIFLPW03

LPW03 - Burned Olive Green Liquid Pigments Washes

The Burned Olive Green liquid pigment from the Liquid Pigments Washes range by Lifecolor is a dark olive shade with which, after painting, the shadows and dirty corners of green vehicles are deepened.
In stock
3.96 €
Green Stuff WorldGSW6944

Acrylic Display Covers 150x250mm (22cm high)

Acrylic Display Covers 150x250 mm is a clear acrylic cover 22 cm high with the largest footprint in this line. It takes a larger model or a smaller diorama scene.
In stock
21.96 €
EduardFE15831:48

1:48 P-40N (Weekend Edition) - Zoom Set for Eduard

Eduard Zoom - Curtiss P-40N, 1:48 (for the Eduard Weekend kit) is a set of color-printed photo-etched cockpit parts. It is not a model.
In stock
15 €
MASTERAM720561:72

1:72 SAAB 37 Viggen - Pitot Tubes & Angle Of Attack probe

MASTER 1:72 SAAB 37 Viggen – pitot tubes and angle of attack probe are turned metal detail parts for Viggen models. This is not a model but a precise replacement for the plastic probes.
In stock
4.76 €
EduardED6724221:72

1:72 Curtiss H-75 A1/A2 / P-36 upgrade set PRINT

A resin set for upgrading models of the Curtiss H-75 A1/A2 and P-36 fighter in 1:72 scale. The parts are made by direct 3D printing and replace selected plastic parts.
In stock
8 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.