A complete fit-out of the wheels of the Sd.Ah. 116 trailer in 1:35 scale including spares, in the rendering with compressed rubber. The type 2 variant.
Responsibility details are not available.
The trailer designated Sd.Ah. 116 was the German answer to the question of how to move a tracked machine a long distance without its wrecking its own running gear. A low-set platform, folding ramps and a quantity of small wheels divided into bogies made it possible to load equipment weighing around twenty tons and tow it behind a heavy half-track tractor across half a country if need be.
The set covers the running wheels and the pieces held in reserve, in the shape where the rubber is compressed by the weight of the rig. This is not a puncture but the slight widening of the contact area that a real wheel always has and a smooth cylinder from the frame does not. The difference is unobtrusive and it is precisely what takes away the finished model's air of floating above the base.
For this trailer the brand lists three renderings differing in the shape of the wheels. The choice depends on which shape of the rig you are building and what references you have at hand; in size the sets are interchangeable. Work bogie by bogie and watch that all the wheels bed down into one plane. With so high a count every deviation adds up, and the finished trailer then stands crooked.
The trailer itself was seldom alone in photographs. In a scene it makes sense only with a tractor, a loaded machine and a crew walking round it with chocks and ropes. The wheels are the part the viewer has nearest his eye, because the platform is low and the view of it usually runs from the side.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!