Sd.kfz.250 Front Chassis Structure set is a printed set of the front part of the chassis of the light half-track vehicle in 1:35 scale from LANMO Model.
Responsibility details are not available.
This printed set from LANMO Model replaces the front part of the underside of the vehicle, that is the area of the steered axle and of the supporting structure under the front of the hull. Injection-molded kits usually simplify this part, because the mold cannot reach into narrow places. Printing, by contrast, manages thin sections and lightening holes alike, and the underside of the model comes to life markedly through it.
German light half-tracks were steered by front wheels with no drive, while the pull was provided by the track running gear at the rear. It was a solution that promised the mobility of a track together with the handling of a car, paid for, however, by complicated and time-consuming maintenance. The vehicle served reconnaissance, signals and artillery units, and because it moved close to the combat line, it is captured in period photographs from below as well, where the underside is clearly apparent.
Cut the original plastic parts away only after you have tried the new assembly dry in the hull. The thin items have supports after printing which have to be removed with a scalpel and sanded down with very fine paper. Spray the assembly before you build it in, because once it is seated under the hull you will not reach every corner.
The base kit of the half-track vehicle has to be obtained separately.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!