29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:35 US Infantry Freedom Iraq part I (2 fig.)

1:35 US Infantry Freedom Iraq part I (2 fig.) is a CMK resin set with two figures of American infantry. The first part of a two-part series of figures in 1:35 scale.

Scale1:35
Manufacturer CMK
Product EAN8591111000000

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

American infantry 1:35, part one - CMK resin figures

A pair of castings in modeling resin in 1:35 scale from the maker CMK. It is not a kit of equipment but a figure accessory. The set is marked as part one, which matters for the choice: the manufacturer makes a following part two with two further figures, so a more numerous group can be put together from both packages.

The figures and placing them

Both figures are modeled as infantry for terrain. If you are planning only this set, stand both figures so that there is a relationship between them, a line of sight or a gesture that connects them; two figures side by side with no mutual link come across as two separate exhibits. If you are counting on part two as well, plan the spacing out right from the start, because adding to a group afterwards is always worse than planning it. These figures are not modeled for a vehicle interior or a hatch.

Working with the casting

A resin figure comes on casting blocks that have to be cut off with a fine-toothed saw; nippers will crush the casting at a thin place. The blocks tend to be under the feet and on the back. Level the cut surface on abrasive paper laid on a flat board, otherwise the figure stands crooked. The parting line runs along the sides and across the gear; sand gently and restore the sanded-away edges with a knife. If the arms or the weapon are a separate part, strengthen the joint with a wire pin, as a resin arm held only on a butt joint will sooner or later break off. Cyanoacrylate glue sets fast, so always test a part dry first. Sand with respiratory protection.

Painting

After washing off the release agent and a thin base, paint the clothing in desert coloring lighter than the subject appears, because in 1:35 scale a shade darkens optically. Dust belongs on the boots and the bottoms of the trouser legs: a dry pigment or a fine spray of thinned light paint ties the figure in with the terrain.

Who the set is for

  • Builders of 1:35 dioramas with contemporary American equipment
  • Modelers who want to extend the group gradually with the following part two
  • More experienced builders, as resin is cut, sanded and glued with cyanoacrylate
  • Those looking for an accessory that gives a model scale and life

The figures are supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. According to the name these are the two figures of part one. The following set with two further figures is sold separately.

If you want to join both parts into one group, it is easier to plan the positions right at the start than to glue figures into a scene that is already finished and sanded.

Drill a hole into both parts and glue in a short wire pin. A resin butt joint holds on glue alone and breaks off during handling.

With dust on the boots and the bottoms of the trouser legs, using a dry pigment or a fine spray of thinned light paint. Without that the figure looks as if it had merely been set down in the scene.

Last seen

CMKF351631:35

1:35 US Infantry Freedom Iraq part I (2 fig.)

1:35 US Infantry Freedom Iraq part I (2 fig.) is a CMK resin set with two figures of American infantry. The first part of a two-part series of figures in 1:35 scale.
In stock
9.56 €
Quinta StudioQDS485531:48

1:48 Schwimmwagen type 166 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

3D interior decals for the Schwimmwagen Type 166 in 1:48 scale from Quinta Studio (the smaller version): color raised detail of the cabin of the amphibious vehicle.
In stock
4.76 €
AMMO of Mig JimenezA.MIG-6533

SOLUTION BOOK 28 - How to Paint Rebel Galactic Starships

SOLUTION BOOK 28 – How to Paint Rebel Galactic Starships is a color modeling guide devoted to painting and weathering rebel galactic ships in a science-fiction style.
In stock
11.96 €
Dead DesignSM720661:72

1:72 J8M Shusui - Optical Illusion Control Surfaces (CORRECTED) for Hasegawa, Platz

Stencils in 1:72 scale for the Japanese Mitsubishi J8M Shusui rocket fighter. A fine shadow laid on through a mask breaks up an otherwise smooth surface. Intended for the Hasegawa or Platz kits.
In stock
5.96 €
1:35 ROK M113 in Vietnam Brave tiger-25 %Stock ClearanceFavorite
DEF ModelDD350161:35

1:35 ROK M113 in Vietnam Brave tiger

A decal set for M113 carriers of South Korean units in Vietnam in 1:35 scale from DEF Model brings markings for finishing a completed model. It is not a kit.
Last one!of 3
19.16 €14.36 € You save 4.80 €
RT-DioramaRT358921:35

1:35 Printed Accessories: Oriental Wall and Floor Tiles Nr.6

The printed accessory 1:35 Printed Accessories: Oriental Wall and Floor Tiles Nr.6 from RT-Diorama closes the numbered range of oriental tiling for dioramas in 1:35 scale. It is a flat subject for building scenery.
In stock
5.16 €
OmaskOMK170051:72

1:72 P-51D masky na krytky (pro Tamiya)

Omask 1:72 P-51D - masks for the access panels (for Tamiya) is a set of cut masking templates for the Tamiya Mustang model. It is not a kit - you have to have the model.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.