1:48 FA-18D late 3D-Printed & coloured Interior on decal paper (Hasegawa) (with 3D-printed resin parts) (Small version)

1:48 FA-18D late 3D-Printed & coloured Interior on decal paper (Hasegawa) (with 3D-printed resin parts) (Small version)

20.08 €
Add to Cart

1:48 FA-18D late 3D-Printed & coloured Interior on decal paper (Hasegawa) (with 3D-printed resin parts) (Small version)

The smaller version of the colored Quinta set for the interior of the F/A-18D late model in 1:48 scale, completed by printed resin parts. Made for the Hasegawa kit.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591114482759

Responsibility details are not available.

26.76 € 20.08 €
16.60 € without VAT
−25 % You save 6.68 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F/A-18D is the two-seat version of the Hornet carrier combat aircraft. The cockpit with two stations under a single canopy is clearly visible on the model and looks unfinished when empty, so this is exactly where most add-on sets are aimed.

What the set offers

The Quinta set completes the interior of the F/A-18D late model in 1:48 scale and is cut to suit the Hasegawa kit. The elements are printed, have raised relief and come already colored, so the instrument panels, the side consoles and the seat belts do not have to be laboriously painted or outlined. This is the smaller version of the set, that is a narrower selection of elements than the full variant.

How it is applied

The sheet is briefly dipped in lukewarm water and the element is slid off the carrier paper into place. It has no adhesive layer of its own and holds on a gloss coat of the Future, Klear or Tamiya X-22 type, so a matte surface is a mistake. Level the areas in the cockpit beforehand, give them a gloss coat and press the seated element down with a soft stick from the center toward the edges, so that no air is left under it. Do not use a decal softener or a decal setting solution, as they attack the printed resin.

Printed resin parts

Cut the printed parts enclosed away from the print supports with a sharp blade a little away from the part, and sand the remaining stubs down with fine paper. They are glued with cyanoacrylate glue, and before painting you should wash them and let them dry completely.

Who it is for

The set is for builders who want a cockpit that reads properly even under a closed canopy and who at the same time do not want to spend evenings painting tiny dials. Working with it is quick, needs no airbrush and is within reach even of a modeler who is only just trying add-ons out. Unless stated otherwise, the package holds only the add-on set; the kit, paints and glue are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. The sheet is briefly dipped in lukewarm water and the element is slid off the carrier paper onto the gloss coat, which holds it; it has no adhesive layer of its own. Do not use a decal softener or a decal setting solution.

It is cut to suit the F/A-18D model in 1:48 scale from Hasegawa. On other kits count on adjusting the shape of the elements.

No. The elements of the set are already colored, including the instrument panels and the seat belts. You will only be painting the surrounding areas of the cockpit.

Separate them from the print supports with a sharp blade, sand the cut down and glue the part with cyanoacrylate glue. Wash it before painting.

Last seen

1:48 FA-18D late 3D-Printed & coloured Interior on decal paper (Hasegawa) (with 3D-printed resin parts) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS+483471:48

1:48 FA-18D late 3D-Printed & coloured Interior on decal paper (Hasegawa) (with 3D-printed resin parts) (Small version)

The smaller version of the colored Quinta set for the interior of the F/A-18D late model in 1:48 scale, completed by printed resin parts. Made for the Hasegawa kit.
3 leftof 5
26.76 €20.08 € You save 6.68 €
HAD modelsHADDW720081:72

1:72 MiG-29 B / UB - Hungrian Air Force NATO Dry-Water Decal Sheet

A decal sheet in 1:72 scale with markings of the Hungarian MiG-29B and MiG-29UB in the later rendition carried under the NATO designation.
In stock
15.96 €
Thunder ModelTHF350011:35

1:35 LRDG Crew Figure Set 1

LRDG Crew Figure Set 1 (1:35) by Thunder Model is a set of three resin figures of the crew of the Long Range Desert Group.
In stock
15.16 €
Kits-WorldKWB144-5041:144

1:144 RAF Coltishall, Norfolk, United Kingdom, 1950's-1970's. 438mm(W) x 225mm(H)

A printed display base for a 1:144 model, RAF Coltishall, Norfolk, the 1950s to the 1970s , shows the surface of this base in the rectangular format 438 x 225 mm.
In stock
10.36 €
Geronimo72ArtGRN720071:72

1:72 EA-6B Prowler-Rookie

1:72 EA-6B Prowler-Rookie is a decal set from the manufacturer Geronimo72Art for a model of the carrier-based electronic warfare aircraft Grumman EA-6B Prowler.
In stock
25.16 €
Number FiveN5-C107

XJ220 Green

Number Five XJ220 Green is a green paint ready for airbrushing, 30 ml, named after the Jaguar XJ220.
In stock
5.96 €
Dead DesignUC720221:72

1:72 Yokosuka D4Y1/2/3/4 Susei undercarriage bay paint masks

Masks for the landing gear bays of a model of the Japanese Yokosuka D4Y Suisei carrier bomber in 1:72 scale.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.