Pilot Replicas 1:48 3D printed VOLVO Sugga TP21 is a kit of this Swedish off-road vehicle made by three-dimensional printing.
Responsibility details are not available.
The model comes from the Pilot Replicas range, which has long devoted itself to Swedish subjects. According to the name it is a product made by three-dimensional printing, that is goods intended rather for more experienced builders: the parts tend to be thin, the supports are removed carefully and the joints are treated with cyanoacrylate glue. A particular registration marking of the vehicle is part of the name as well.
The off-road car with the nickname Sugga served the Swedish army from the 1950s and you recognize it at first glance by its rounded all-metal body. It was used to carry people, as a liaison and staff vehicle, and it was commonly driven around airfields, where it supported the operation of combat aircraft. It is exactly that role that makes it a rewarding accessory to aircraft models in the same scale.
First look the parts over against the light and cut the remains of the supports off with a sharp knife, not with cutters. Wash the surface in lukewarm soapy water and let it dry completely. A thin coat of primer will reveal any shortcomings and improve the adhesion of the paint. Liven up the dark green Swedish finish with a lighter shade on the surfaces of the roof and the hood and add dust on the fenders.
The goods are supplied unfinished and unpainted; the customer obtains the glue and the paints needed separately.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
