Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!
1:48 A-10A Thunderbolt II: cuts for the frames of the bubble canopy of the attack aircraft. One continuous curve is exactly what tape shaped by hand fails on.
Responsibility details are not available.
A set of cuts for the framing of the canopy of the A-10A ground-attack aircraft in 1:48 scale. The cockpit has the shape of a pronounced bubble with a narrow frame running round in one continuous curve. It is exactly on a shape like that that tape applied by hand ripples and the edge wanders; a pre-cut piece holds the line by itself.
The A-10 did not come about as an airframe for which armament was then sought. It was the other way round: first there was a seven-barrel rotary cannon and the rest of the machine grew around it. The pilot sits in a titanium bath, the control runs are duplicated and backed up mechanically, so the aircraft can carry on even after hits that would bring another type down. Two engines sit high above the rear fuselage between a pair of vertical tail surfaces, which shields them from below and at the same time protects them when operating from roughly prepared strips. The wide straight wing gives excellent agility at low speeds over the battlefield.
The gray shades of the attack aircraft forgive little, so sand the frames carefully before masking. Apply the shade of the cockpit as the first coat. It is a good idea to cover the whole bubble and uncover only the frames, so that misted paint does not reach the glass. Take the cuts off while the paint is fresh.
The particular kit is part of the name of the item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!