SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here
1:48 A-26C-15 Invader double-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader double-sided mask self-adhesive pre-cutted for ICM

11.56 €
Add to Cart

1:48 A-26C-15 Invader double-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader, double-sided self-adhesive mask is a pre-cut set of masks for the outer and the inner side of the glazing of a model of the glass-nosed Invader in 1:48 scale.

Scale1:48
Manufacturer Art Scale
Product EAN8891151000044

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Double-sided masking set 1:48 A-26C-15 Invader (Art Scale)

A self-adhesive Art Scale masking set in 1:48 scale for a model of the Invader in the glass-nosed version. The masks are pre-cut to their final shape and, in the double-sided version, they cover the outer and the inner side of the clear parts. The framing can thus be sprayed from inside in the interior shade and from outside in the covering finish of the airframe, with no brush and no visible strokes. The set is an accessory for a kit; the model, paints and glue are not in the box.

The difference from the single-sided variant

The single-sided set deals only with the outside. This one additionally contains masks for the inner side, which pays off precisely on the glazed nose, which can be seen well into the model and where an untreated transparent frame draws attention at once.

The real subject

The Douglas Invader was a twin-engine all-metal attack bomber with piston radial engines and tricycle landing gear. The glass-nosed version served for directing the aircraft onto the target in level bombing, while the attack variants had fixed gun armament instead of glazing. The type remained in use long after the Second World War and went through a range of changes of equipment and finish.

Applying, spraying and lifting off

Work from the back forward: the inner masks and the interior shade first, and only once dry the outside. Wash the clear part before applying them in lukewarm water with detergent and let it air dry, then do not touch it with your fingers. Seat the masks one at a time with tweezers and press the edges down with a blunt toothpick; an edge that has not been pressed down is the only reason paint runs under. Spray thin coats with a pause between them. Take the masks off shortly after the paint has dried, lift a corner with the tip of a scalpel and pull at an angle along the surface.

Who the set is for

  • Modelers who want the framing painted from inside as well
  • Builders of the glass-nosed version, where the interior is clearly visible
  • Those who finish a model for a display case and deal with small details too
  • Airbrush users working with two shades on one part

The box holds masks only. The kit, paints and glue are not included.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set contains masks for both sides of the clear parts, so you spray the framing from inside in the interior color and from outside in the covering shade.

It is not. It is a masking accessory for a kit, which has to be bought separately.

The inner masks and the interior, let it dry, then the outer masks and the covering finish. Finally take the masks off.

Not reliably. The cut is tied to the shapes of the particular ICM kit.

Last seen

Art ScaleASKM480851:48

1:48 A-26C-15 Invader double-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader, double-sided self-adhesive mask is a pre-cut set of masks for the outer and the inner side of the glazing of a model of the glass-nosed Invader in 1:48 scale.
In stock
11.56 €
Star DecalsSD35-8851:35

1:35 JNA Numbers - Jugoslavian tank numbers 1990s.

JNA Numbers - Jugoslavian tank numbers 1990s. is a set of waterslide decals in 1:35 from Star Decals with the tactical numbers of Yugoslav tanks of the 1990s.
In stock
8.36 €
HGWHGW4810331:48

1:48 MESSERSCHMITT BF109 E-3 /4 /7 / TROP - NÝTOVACÍ SADA

An HGW riveting set in 1:48 scale for models of the Messerschmitt Bf 109 E-3/E-4/E-7/Trop . Positive (raised) rivets for a realistic airframe surface.
In stock
17.96 €
AberABR25L031:25

1:25 Turned barrel for German tank machine gun MG34

Turned barrel for German tank machine gun MG34 (1:25, Aber) is a turned metal barrel for the tank version of the German MG34 machine gun. This is a detail accessory, not a standalone model.
In stock
6.76 €
HasegawaHA207751:24

1:24 Lancia 037 Rally Duriforte 1986 ERC Detail Up Version

Lancia 037 Rally Duriforte 1986 ERC is an injection-molded plastic model of the Group B rally car in 1:24 scale from Hasegawa, completed by photo-etched sheet. The model is supplied unassembled and unpainted.
In stock
39.96 €
PANZER ARTFI75-007

75mm Richard The Lionheart, Accra 1194

A collector's figure of the English king Richard the Lionheart in the 75 mm size. Suitable for separate display as well as a figure for a display case with a period theme.
In stock
39.96 €
First to fightFTF0961:72

1:72 Renault R39 z armatą 37 mm SA38

A plastic kit of the French light tank Renault R39 with the 37 mm SA38 gun in 1:72 scale from First to Fight.
In stock
9.96 €
1:72 Mitsubishi F-1/T-2 wheels set-25 %Stock ClearanceFavorite
ReskitRS72-00551:72

1:72 Mitsubishi F-1/T-2 wheels set

The Mitsubishi F-1/T-2 wheels set 1:72 from the maker Reskit is a resin set of landing gear wheels, an accessory for sharpening up a model of the Japanese Mitsubishi F-1 / T-2 aircraft.
9 left
5.96 €4.48 € You save 1.48 €
Quinta StudioQDS482831:48

1:48 F/A-18A / C early 3D-Printed & coloured Interior on decal paper (Hasegawa) (Small version)

Quinta Studio 1:48 F/A-18A / C early interior (small version) is a 3D printed colored decal set for the cockpit. The set is prepared for the Hasegawa kit.
In stock
9.56 €
Mirage HobbyMIR4006081:400

1:400 HMS Campbeltown St Nazaire

A plastic kit of the HMS Campbeltown (the raid on St Nazaire) in 1:400 scale from the Polish brand Mirage Hobby — a full-hull model of the British destroyer.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.