1:48 B-26B Marauder in the double-sided form: besides the outer face the set also contains cuts for the reverse of the glazing, from the glazed nose to the windows on the sides of the fuselage.
Responsibility details are not available.
A masking set for the B-26B Marauder medium bomber in 1:48 scale, prepared for the outer and the inner side of the transparent parts. The Marauder has glazing in several places at once: the glazed navigator nose, the greenhouse above the cockpit, a row of windows on the sides of the fuselage and the dorsal turret. Outlining all of that by hand with tape is a job for several evenings.
The Marauder was created as a fast bomber with a cigar-shaped fuselage and a fairly small wing. The high wing loading gave it excellent speed but also uncomfortably high takeoff and landing speeds, which in training units cost crews their lives and gave the type a bad name. On the B version the span was increased and the vertical tail grew, so the behavior of the machine calmed down markedly. Over western Europe the type then flew an enormous number of combat hours and its loss rate was among the lowest of the bombers of its kind.
First apply the inner cuts and spray the shade of the cockpit; only then seat the parts in the fuselage. Mask the side windows separately and apply the paint from the edge inwards. On the glazed nose watch the seam between the glazing and the skin, because that is exactly where the paint likes to build up.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
