Eduard 1:48 F-104A SPACE is a set of three-dimensional 3D decals for the cockpit of a Starfighter model in the F-104A version in 1:48 scale.
Responsibility details are not available.
A set from the SPACE range by the Czech manufacturer Eduard for a model of the Lockheed F-104A in 1:48 scale. These are decals with a layered, cured top surface: the panels have real depth, the dials have domed glass and the color finish is done from the factory. It is applied in the same way as a decal. For the later F-104C version there is a separate set, so take care over which one your kit needs.
The cockpit of the early interceptor Starfighter has a densely populated instrument panel and side consoles, which plastic can manage only as a shallow relief. A three-dimensional decal will replace them with a sharp, color-finished surface with depth, and that without bending metal and without cyanoacrylate glue. In terms of time it is the quickest route to a faithful cockpit.
The surface underneath has to be smooth and glossy, otherwise a silvery edge will appear. The plastic relief under the decal is as a rule sanded smooth, so that the panel sits down flat. Wet only the carrier paper with a sponge and a drop of detergent, lift the element off with tweezers and fix it with white dispersion glue. A decal softener and a setting solution do not belong here, as they would attack the printed resin; a thicker layer reacts differently from an ordinary decal. Do not repaint the finished panels; at most add the sheen of the dials with a drop of clear varnish.
It is an accessory set, not a model of the aircraft. The kit, paints and varnishes are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
