SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:48 F-104G/F-104DJ EXPERT kabuki masks

Cut masking strips of kabuki paper for the model of the F-104G and the two-seat F-104DJ in 1:48 scale. The EXPERT standard from the range of masks for this type.

Scale1:48
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

7.96 €
6.58 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Lockheed F-104 Starfighter is an American supersonic aircraft from the 1950s with an unmistakable silhouette: a very short straight wing with a sharp leading edge, a slender fuselage and a horizontal tail set at the top of the fin. The letters in the designation tell apart the two versions the set is cut for. The F-104G is the single-seat multirole variant and the most widespread member of the whole family, which served with a number of European operators. The F-104DJ is the two-seat trainer version delivered to Japan; the seats sit one behind the other under a lengthened canopy, so the shape of the glazing differs from the single-seat machine.

What kabuki masks are

The masks are cut from thin Japanese paper with a lightly tacky layer. The paper can be stretched slightly around a curve, so it seats on curved glazing better than ordinary masking tape, it does not lift paint when removed and it leaves no adhesive behind. The elements are pre-cut to shape, so there is no cutting to a template directly on the model. EXPERT is the designation of the standard within this range of masks; which areas the set covers and which kit it is cut for are given by the manufacturer in the instructions.

How to use the masks

The masks go on before spraying, onto a clean and degreased surface. Lift the element out with the tip of a knife, seat it into the frame of the glazing and press the edges down with a toothpick so that paint cannot creep under them. Apply the paint in several thin coats and direct the stream rather perpendicular to the surface than at a slant under the edge of the mask. Remove them as soon as the paint has flashed off; on a fully cured coat they peel away less willingly. Pull the mask back over itself as you do so, not straight up.

  • 1:48 scale, cut masks of kabuki paper
  • listed for the F-104G and F-104DJ versions
  • applied before spraying, removed once the paint has flashed off
  • the paper stretches around a curve and seats on curved glazing too

Terms of supply

The package contains masks. The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The masks are supplied on their own, and the kit has to be bought separately.

Before spraying, onto a clean and degreased surface. They come off as soon as the paint has flashed off; on a fully cured coat they are harder to remove.

The masks are cut for a particular kit. Before buying, check in the manufacturer's instructions which model and which version they are cut for.

The set is listed for both versions. The F-104G is the single-seat variant and the F-104DJ the two-seat trainer version delivered to Japan, which has a different canopy shape.

Last seen

New WareNWAM08141:48

1:48 F-104G/F-104DJ EXPERT kabuki masks

Cut masking strips of kabuki paper for the model of the F-104G and the two-seat F-104DJ in 1:48 scale. The EXPERT standard from the range of masks for this type.
In stock
7.96 €
PANZER ARTRE35-3921:35

1:35 ZiS-151 Road Wheels (Jaroslavskij Zavod)

PANZER ART 1:35 ZiS-151 Road Wheels is a resin set of road wheels for the Soviet ZiS-151 truck. It is an accessory, not a complete model.
In stock
15.96 €
WEIKERT DECALSWEIKDEC7011:72

1:72 Markings for the RWD-17W and Nikol A-2

1:72 Markings for the RWD-17W and Nikol A-2 is a decal set for two Polish aircraft on one sheet.
In stock
7.16 €
Dynamo-ModelsDNM480271:48

1:48 '40 - French Infantry On The March No.4

French Infantry On The March No.4 is the fourth numbered figure of a French infantryman on the march in 1:48 scale from Dynamo-Models. The name also gives the year 40, that is the campaign of 1940.
In stock
6.36 €
1:48 Consolidated B-24J Liberator engines x 4 PRINT-25 %Stock ClearanceFavorite
EduardED64810291:48

1:48 Consolidated B-24J Liberator engines x 4 PRINT

The resin 3D-printed accessory B-24J Liberator engines (4 pieces) PRINT in 1:48 scale by Eduard (the Brassin line). A set of four detailed radial engines of the American bomber. It is an accessory set, not an airplane model.
2 leftof 15
27 €20.24 € You save 6.76 €
Armour ModelsA40DS0021:40

1:40 Fiat C.R 42 Falco kokpit

A cockpit set for a model of the Italian Fiat CR.42 Falco fighter biplane. The range of parts and the procedure for fitting them are given in the manufacturer's instructions.
In stock
7.56 €
IBG modelsIBG720511:72

1:72 Zrinyi II Hungarian Assault gun

An injection-molded plastic kit of the Hungarian Zrínyi II assault gun in 1:72 scale from IBG. A model of a tracked Second World War assault gun.
In stock
11.16 €
Art ScaleASKM480851:48

1:48 A-26C-15 Invader double-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader, double-sided self-adhesive mask is a pre-cut set of masks for the outer and the inner side of the glazing of a model of the glass-nosed Invader in 1:48 scale.
In stock
11.56 €
Star DecalsSD35-8851:35

1:35 JNA Numbers - Jugoslavian tank numbers 1990s.

JNA Numbers - Jugoslavian tank numbers 1990s. is a set of waterslide decals in 1:35 from Star Decals with the tactical numbers of Yugoslav tanks of the 1990s.
In stock
8.36 €
HGWHGW4810331:48

1:48 MESSERSCHMITT BF109 E-3 /4 /7 / TROP - NÝTOVACÍ SADA

An HGW riveting set in 1:48 scale for models of the Messerschmitt Bf 109 E-3/E-4/E-7/Trop . Positive (raised) rivets for a realistic airframe surface.
In stock
17.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.