Glazing masks for the cabin of the McDonnell Douglas F-4 Phantom II in 1:48 scale, for the B, C, D, J and N versions.
Responsibility details are not available.
Pre-cut self-adhesive masks which during the painting of the cabin cover the clear areas and uncover only the framing. According to the name they are intended for the F-4B, F-4C, F-4D, F-4J and F-4N versions.
Why with the Phantom of all aircraft
The cabin of the Phantom is a two-seat one and is made up of the windshield and separate sliding parts, so there are substantially more frames on a model than on a single-seat fighter. A frame traced by hand in 1:48 scale comes out unevenly wide and every inaccuracy is visible on a glossy part. A mask removes this problem.
How to work with the masks
Wash the clear part in lukewarm water with dish soap and let it dry. Grease from the fingers is the main reason why a mask does not hold. Lay it down with tweezers, press it along the perimeter and spray in thin coats. Remove the mask with tweezers by pulling it across the edge of the frame; any overspray can be scraped away carefully with a toothpick while the area is not yet clear coated.
The McDonnell Douglas F-4 Phantom II was a two-seat supersonic multirole aircraft that served with the US Navy, the Marine Corps and the US Air Force and in many other countries. The B, J and N versions were naval ones, the C and D versions US Air Force ones.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!